sailboat trailer for sale

(281) 844-4458

Welcome to Custom Sailboat Trailers

Trailer Facts

• We build galvanized sail boat trailers
• Some of our trailers are refurbished. 
• They are all float on trailers 
• We build extensions for launching
• Our used trailers are rebuilt stronger 

• We also move boats
• Transport Boats
• Trailer Parts
• Tongue extensions
• Side Guides
• Safety Chains

Interesting Facts

•  In 2008 the  EPA took the lead and nickel out of the hot dipped galvanize. I bought  all the hot dipped galvanized frames i could,built before 2009 at scrap  prices,so the trailer manufacturers could buy the aluminum to get a head  start in the aluminum trailer business. Some of the trailer builders  that did not get in the race,went under.Sportsman trailers in Texas  was one of them. I bought about 200 of there frames. These frames were  all built for mono hulls.I build my sail boat trailers with these  frames. I go up with a 2" galvanized pipe,then weld two 3/4" nuts near the top.I brace the risers  with two are three 1 1/2"x1/4" angle iron braces with a 1 1/2" pipe  telescoping up and down with a swivel pad or runners. 
•  J 22 and J 24  trailer fits most any boat with a deep draft.The axles are on slides  U-bolted to frame so you can add another axle. 
• This trailer  is 30 ft . It will adjust to   any sail boat are mono hull boat. It is  galvanized  It is 42 years old. I has the  good galvanize.and great  American steel. 
• Galvanized with three 5200 lb axle,     10 risers, adjustable to fit deep drafts 
•  25 to 28 ft shallow draft or swing keel
• Painted  trailer with 10 risers, 37ft long, with three 5200 lb axles,surge brake  on two axles. It is ready to go. Call it will sell fast. 
• This trailer carried the boat 10,000 mi. It is for sale for $2,500.I will add a bow stop 
•  Yard trailer  that can be converted later for road trailer we can add  one more 4500  lb axle and adjust the bow stop. The bow stop is U-bolted to the tongue.  When you have completed the work and ready for the road. We can assist  you in completing the trailer. 
• Rubber bushing under keel board to take the shock off the keel.  

Painted trailer for Catalina 25

• Hunter 26 
• Oday24 
• $2300 
•  24 ft frame for 30 ft boat for three  axles 
•  This trailer  was made for a 5500 lb boat. We are able to add another slide with  axles, brake, and fenders to accommodate an 8000 lb boat. Also the two  axles were on slides U-bolted to frame. 
• J27 1985  had  to add another axle. It had 700 lbs of water absorbed in hull. By  having axles on slides, we saved him about $2200.One happy camper. 

more trailers

• Trailer on right, before uprights we go up  with 2" galvanize pipe with 1 1/2" to telescope up and down with swivel  pad on top.On top of 2" we weld two 3/4" nuts to hold the 1 1/2" That is  a big bolt. 
• Trailer frame before up rights installed
• This picture is to show you the extensions with tires we build.We can build any length. We also build extensions for the tongue.These are built with 3x3 tubing,no wheels.  if they are  under 8 ft we can ship for under $50. 

Photo Gallery

Copyright © 2022 Custom Sailboat Trailers - All Rights Reserved.

Powered by GoDaddy

• Trailers for Sale
• New and Used Boat Trailers for Sale

View New and Used Boat Trailers for Sale

Every boat owner needs a great boat trailer to go with their watercraft. Boat trailers allow you to take the boat in and out of the water for storage or service, and they also allow you to transport your boat from one body of water to the next.

When you’re selecting a trailer for your boat, you’ll want to consider the weight of your boat and the length of your boat. You want your trailer to be slightly longer than your boat, and you want to ensure the trailer has a high enough gross vehicle weight rating, or GVWR, to handle your watercraft. Keep in mind the weight of your boat is the boat plus the engine, fuel, and onboard gear. Lighter weight boats can be towed using a single axle boat trailer, but if you have a larger boat, you’ll want to invest in a double axle boat trailer.

We carry leading boat trailer brands like EZ Loader and Magic Tilt so that your next trip to the boat ramp is quick and easy. Get started by searching new boat trailers today.

Displaying 1 - 15 of 57 Items

2024 Load Rite P-24/26T-5000TRIB2

Sold by: Smouse Trailers & Snow Equipment NEW 2024 Load Rite 24' - 26' Tritoon OR Pontoon Boat Trailer ## CASH, CHECK OR FINANCING PRICE $7375!!! **OPTIONS ADDED:** **(4) Step Ladder for Adjustable Arm Bowstop, 2000# Winch** **RA[...]

Sold by: Smouse Trailers & Snow Equipment NEW 2024 Load Rite 24' - 26' Tritoon OR Pontoon Boat Trailer CASH, CHECK OR FINANCING PRICE $7375!!! OPTIONS ADDED: (4) Step Ladder for Adjustable Arm Bowstop, 2000# Winch RADIAL TIRES - 21[...]

Sale  

2024 Genesis Trailers Tandem TH24

Sold by: Joe's Trailer Mfg 24' HYDRAULIC LIFT PONTOON TRAILER Hot Dipped Galvanized 2 x 5" 11G tubing Hydraulic center lift Tongue jack Polyboards Solar charging Led lights Equalizer Suspension Load guides  

  IN STOCK  

2023 Load Rite P-22/24T-4700TB2

Sold by: Smouse Trailers & Snow Equipment NEW 2023 Load Rite 22' to 24' Pontoon Boat Trailer w/ Mounted Spare CASH OR CHECK $5299!!! P-SERIES PONTOON TRAILERSBunkGalvanizedSingleTandem/Tri-Axle The P-Series Load Rite pontoon traile[...]

Sold by: Smouse Trailers & Snow Equipment NEW 2023 Load Rite 22' to 24' Pontoon Boat Trailer w/ Mounted Spare ## $5099 IS CASH, CHECK OR FINANCING PRICE!!! **P-SERIES PONTOON TRAILERSBunkGalvanizedSingleTandem/Tri-Axle** **The P-[...]

Length: 24' 0"

2024 Genesis Trailers Tandem PF26

Sold by: Joe's Trailer Mfg 26' GENESIS PONTOON TRAILER HOT DIPPED GALVENIZED LOW PROFILE DESIGN TO REDUCES WIND RESISTANCE LOWER CENTER OF GRAVITY WHILE TOWING HEAVY 11 GAUGE TUBIING FOR A STRONGER FRAME HIGH SPEED 13&quo[...]

2024 Karavan 000T2RK00

Sold by: Cycles 128  

Sold by: Cycles 128

2024 Genesis Trailers Tandem PC24

Sold by: Joe's Trailer Mfg 24' GENESIS CRANK UP PONTOON TRAILER Hot Dipped Galvenized Heavy 11G tubi ng Tongue Jack Grease Zerks on all Axles 42" wide frame to accommodate most pontoons Equalizer suspension system Lo[...]

2024 Genesis Trailers Tandem PC22

Sold by: Joe's Trailer Mfg 22' GENESIS CRANK UP PONTOON TRAILER Hot Dipped Galvenized Heavy 11G tubi ng Tongue Jack Grease Zerks on all Axles 42" wide frame to accommodate most pontoons Equalizer suspension system Lo[...]

• About TrailersUSA

TrailersUSA is a site dedicated to providing resources and links that help viewers learn more about the trailer industry. We are devoted to providing members of the trailer community a home, online. The team at Trailers USA helps trailer dealers, manufacturers and other rv and trailer related companies design and maintain their online presence.

Additional Info

• List Your Dealer Inventory
• Contact TrailersUSA
• Privacy Policy
• Do Not Sell My Data

Customer Service

Monday – Friday 8:30AM – 5:30PM EST

FOR ALL YOUR PARTS NEEDS

START YOUR SEASON RIGHT

MAKE YOUR TRAILER UNIQUE

BUILD YOUR CUSTOM TRAILER

You can enjoy the reliability and performance of a Load Rite trailer for your sailboat by specifying a custom trailer through your dealer.

We combine our modular pods with a keel board and winch stand options on any number of Load Rite or 5 STARR bunk models to conform to many sailboat applications. Each trailer must be specified on an individual basis. To get started, download the attached sailboat trailer specifications document before contacting your local Load Rite dealer . Your dealer will collect the model number and other details about your boat and work with our Customer Service and Engineering staff to come up with a recommendation and a quote for your Load Rite trailer.

All of these features are backed by the industry leading Load Rite 2 + 3 Warranty.

Specifications subject to change without notice.  Not responsible for publishing errors.

STANDARD FEATURES

Galvanized Steel Frame

Tubular structural steel, fully hot dip galvanized, provides the ultimate finish for any boat trailer.  Tubular design shrouds wiring and brake lines from damage.  All machining and welding is performed before galvanizing, so there are no surfaces left unprotected from a boat trailer’s ultimate enemy: corrosion.

Patented Aluminum I-Beam Frame

Patented designs offer many features that add functionality to a great look.  Integrated wire gutter beneath the top flange securely protects wiring and brakelines.  Models to 7,300 lbs. capacity feature a captured fastener channel along the bottom flange offering invisible mounting points for other features.  Web mounted crossbars strengthen the overall frame assembly.

Galvanized Crossbars and Tongue

Torsion Axles

Torsion axles provide independent suspension, exceptional rigidity, corrosion resistance, and a far superior ride to any leaf spring suspension.  Available on most models.

Greaseable Hubs

Trailer with peace of mind knowing that you’ve inspected the condition and topped off the lubricant level in each hub of your trailer.

Disc Brakes (Where Installed)

This trailer is equipped with disc brakes (where installed).  Load Rite recommends disc brakes on all wheels where available.  Disc brakes are self-adjusting and self-cleaning and require minimal maintenance in order to continue to deliver top performance.  Follow maintenance tips in your Owners Manual for more detailed instructions.

DOT Rated Tires and Lighting

All Load Rite original equipment tires and lighting components are fully DOT approved.

Balanced Wheels 13″ and Larger

CounterAct Wheel Bead Balancing is now included on all 13″ and larger wheel assemblies as a standard feature.  The wheels dynamically balance during each use. Visit counteractbalancing.com for more information.

Aluminum Diamond Plate Fenders

A stylish design combined with extreme durability.  Standard on all single axle models with 13″ and larger wheels.

Heat-Shrunk Sealed, Concealed Wiring

Standard equipment on all trailers 17′ and longer except welded frame models.

Adjustable Carpeted Bunks

Traditionally known as V-bunks, this system offers both high strength and a wide range of adjustability.  Out of adjustment?  There are shorter and taller bolster brackets available in many heights.

A winch is standard equipment on all boat and PWC models.  Capacity and features vary by application.

Tongue Jack

Tongue jacks are standard equipment on all Load Rite Elite models 90″ wide and wider except two-place PWC models, all 5 STARR models, and all UT, EQ, and CH models.  Appearance and specifications vary by application.  Tongue jacks are optional on all other models.

NATM Certified

Each year Load Rite trailers undergo a detailed inspection process in order to earn the right to proudly display this certification on products we manufacture.

NMMA / NATM Certified

2 Plus 3 Years Coupler to Taillight Warranty

Load Rite’s premiere warranty exclusive to our Elite line of trailers.

102″ Overall Width (96″ and Wider Models)

Add extra width to standard 96″ wide trailers.

Swing Tongue

Applications are limited by trailer capacity and tongue length.  Not available on models exceeding 6,000 lbs. capacity.  Consult with a dealer.

Radial Tires

Smoother riding and longer wear life than many bias-ply tires.  A highly recommended upgrade.  Available for 13″ and larger wheels.

Aluminum Wheels

A stylish option available with bias-ply or radial tires for most models in 12″, 13″, 14″, 15″ and 16″ sizes.

Spare Tire and Carrier

The most important option to consider, every trailer should have a spare tire readily available.  Consult dealer for recommended bracket for individual application.

Vault® Hubs

Vault® – The VAULT® “Hybrid Lubrication System” uses a semi-fluid oil in a pressurized chamber to give you the ultimate in wheel bearing lubrication and protection. At ambient temperatures the oil is thick with a viscosity approaching grease. As the bearing temperature rises during towing, the VAULT’s Hybrid Oil thins out replenishing the bearings with lubricant and dissipating heat. No inspection, no maintenance and no service required.  *Vault® hubs require Dexter axle.  Vault® and Kodiak® stainless disc brakes cannot be combined.

Consult a dealer to confirm application.

Brakes on All Axles

Important Safety Issue – Brake Requirements   

Brake laws vary by state and require dealers to sell trailers that comply with the brake laws of the state where the trailer will be registered.  This is a very important safety issue .  For full information contact the appropriate state Motor Vehicle Department.  As always, Load Rite recommends brakes on all axles where available.

Stainless Steel Disc Brakes

Optional stainless steel brakes available for most 14″, 15″ and 16″ wheel applications. Can be used with surge and electric over hydraulic actuators.*

May require optional axle installation.  Check with your local dealer before ordering.

Stainless Brakelines

A valuable upgrade to any trailer, but especially those to see service in coastal regions with salt water exposure.

Electric Over Hydraulic Brakes

EOH brakes offer electric in-cab control of standard hydraulic disc brakes.  Requires in-cab controller and 7-pin round electrical connection to the tow vehicle.

LED Lighting

LED lights offer far greater reliability than incandescent fixtures.  Long-lasting and waterproof design make these lights ideal for any trailer application.

2″ by 6″ Bunks

Marine grade carpet over 2″ x 6″ dimensional lumber.

Plastic Bunk Covers

These multi-purpose covers provide a smooth surface to help a metal-hulled boat or pontoon to slide easier when launching and loading.  They also offer an insulating barrier to help prevent corrosion for metallic hulled craft.  Protect your aluminum hull.

Highly recommended for metal-hulled boats and pontoon applications.  Not recommended for gel-coat, plastic, or painted metal hulls.

Steady Rest

Carpeted bunk section positioned above and perpendicular to the trailer tongue.  Provides an extra resting and balance point, and helps prevent keel contact with the tongue when loading in certain ramp conditions.

Carpeted Side Guides

Standard on most skiff and jon models.

Drop-Style Tongue Jack

An upgraded jack that provides greater capacities and fast setup with no need to swivel.

Tongue jacks are recommended on all trailers.  Appearance and specifications vary by application.  Tongue jacks are optional on all models where not original equipment.

Rubber Fenders

Rubber fenders are intended for use on dealer yard trailers.  Yard trailers need the flexibility to adapt to many different hull shapes without imparting any damage in the process.  Rubber fenders minimize the possibility of damage should the fender contact the boat hull.

Sailboat 5S-213600VT

McGregor Sailboat

26 McGregor Sailboat on LR-AB25T6000102LT2 with modifications.

Marshall-Sanderling

Marshall-Sanderling on a modified 182800102VT.

Muscugos 18

Muscugos 18 on Load Rite 18240096VT with dealer installed support system.

Stuart 19, similar to Rhodes 19, on a 5S-17220090VW.

On a custom fit 222650VSGG0.

On a custom fit pod trailer.

Pearson 22 2

Warranty Information

Owners manual.

Loadmaster Co. Ltd

High Quality Custom Boat Trailers

Call Us (800) 258-6115

• Powerboat Trailers

Sailboat Trailers

• Galvanized / Salt
• Classic / Antique
• Performance
• PWC / Jet Ski
• Stack / Search & Rescue
• Accessories
• Sailboat Trailer Options
• Testimonials
• Loadmaster Trailer – Boat Launch
• Loadmaster Trailer – Boat Loading
• Loadmaster Hydraulic Trailer Lifting – Front Angle
• Loadmaster Hydraulic Trailer Lifting – Side Angle
• Loadmaster Custom Motorcycle Trailer

All sailboats are diverse and unique, and for that very reason it is imperative that your boat trailer fits your vessel’s hull and keel exactly. Whether your keel is a swing, bulb, full, fixed, fin, shoal, wing or retractable, your custom sailboat trailer will be designed to effectively support and protect the keel. Also, properly placed screwpads or treated lumber bunks will support your sailboat’s hull and bulkheads. This ensures the safe and sturdy transport of your precious rig! Our trailers are also designed to make loading and launching as easy and pain-free as possible. Some options we use to make this possible include keel rests, keel guides, tongue extensions, side guides, and more!

Floating On and Off, or Hoisting On and Off the Trailer

Many customers want a sailboat trailer that allows their sailboat to seamless float on and off the trailer once it has been backed into the water. We work with you during the design process to make sure we build the trailer suitably for your needs, taking into account the ramps you typically use, water depth, tides, etc. Oftentimes we will design or create new options to remove the stress that is often felt when you find yourself facing the launching ramp. We also have plenty of options to suit your personal sailing lifestyle!

You may also choose to have your sailboat hoisted on and off the trailer. If this is the case, you will want to choose the screwpad style support system, as it also allows for further adjustability when working on the sailboat’s hull.

Loadmaster sailboat trailers have a number of standard features that come with all of our custom trailers. To make your sailboat trailer truly unique, we also offer a range of options to choose from.

• Custom painting for freshwater use
• Galvanize your custom trailer for salt water use
• Mast Carriers and/or ladders
• Pull pin style tongue extension or large separate extensions
• Front Idler axles
• Bunks with or without Sling Pockets
• Structural Screwpads set for the bulkheads on your boat

The Saltwater Experience

If you plan to use your custom sailboat trailer in salt water, we can provide you with the entire Salt Water Series which can be adapted to suit your launching style. Our mig-welded C-Channel steel trailer frames and parts are manufactured and welded, then sent to get hot-dip galvanized after construction. This ensures that the entire trailer is as corrosion-resistant as possible while providing you with strength that will never be offered by an aluminum trailer.

• Galvanizing (All galvanization services come with a 5-year warranty)
• Stainless steel hardware
• Freshwater brake flush kit or numerous Disc brake options
• All LED lights and More!

Call or contact Loadmaster Trailer Company LTD for a fast quote today. Please call or use the form on the right to receive a response quickly via email.

Get A Free Quote

Business Hours

• Monday 8:00 am - 4:30 pm EST
• Tuesday 8:00 am - 4:30 pm EST
• Wednesday 8:00 am - 4:30 pm EST
• Thursday 8:00 am - 4:30 pm EST
• Friday 8:00 am - 4:30 pm EST
• Saturday Closed
• Sunday Closed

Home | About Us | Contact us | Privacy Policy | Blog | Sitemap

Tri-Axle Sailboat Trailer

Custom built tri-axle trailers are available and with over 28 years experience, we guarantee the right fit for your boat.

• 3 x 5500lb axles
• Hydraulic surge brakes (on all axles)
• EZ lube hubs
• Submersible lights
• Steel tear drop fenders
• Tongue jack

All our sailboat trailers are custom made to your boat to ensure a great fit. With over 28 years in the business we offer exceptional quality and value that has drawn thousands of boaters to Marine Cradle Shop year after year.

Please call for any additional pricing and specification information.

To see the product list click here

• Reviews (0)

There are no reviews yet.

Your email address will not be published. Required fields are marked *

Your review  *

Name  *

Email  *

Save my name, email, and website in this browser for the next time I comment.

Related products

P-1600 Sailboat Trailer

Skud 18 2008 Paralympic Sailboat Trailer

P-2900 Sailboat Trailer

P-1200 Sailboat Trailer

Get a free quote.

• 6920 Macon Rd, Columbus, GA 31907
• +1 706-315-3972

Custom sailboat trailers built by sailors for sailors.

Sail Trailers started by offering trailers to local sailors for regatta and cruise travel, and has since expanded globally to serve a growing community of mariners.

Since 2001 we have built custom sailboat trailers, one at a time. Our focus is on quality and funcionality. Since we own and sail a variety of boats, we have a good idea of what works and what doesn't. We will be happy to consult with you and offer ideas and pricing prior to your purchase, and we will offer you our competitors' contact information if you like, confident that once you compare product, price and knowledge, you will return..

At Sail Trailers we build custom trailers for sailboats from 17 to 52 feet and custom transport trailers. We also supply all the parts you will need to keep your trailer on the road or build your own custom masterpiece.

If you would like a quote or have any questions don't hesitate to give us a call or email us at: [email protected]

Ventura Showroom NOW OPEN Saturdays from 9-2! Boat Specialists' Showroom, Service, & Parts Centers are open Monday - Friday, 9 to 5 pm

Boat Specialists will be closed 5/27-5/29 in observance of Memorial Day. All online orders will begin processing on Tuesday, 5/30

SHOP HOT DEALS

Karavan Trailers

Karavan's lineup of marine trailers is built with features that help you haul any boat, smooth sailing on the water & road.

Ready to securely transport a wide range of boat sizes and types, Karavan's trailers are rigorously engineered to be a reliable, quiet and easy-to-tow compliment to your craft.  Karavan's lineup of marine trailers is built with features that help you haul any boat, pontoon or personal watercraft with ease and confidence.  These boat trailers are built to stand up to the elements without sacrificing a shred of performance. Water, mud, salt–they’re no match for Karavan.

Karavan WCE-1250-40 Trailer | Powder Coat Black

Marlon MWC-1500-46 Trailer | Powder Coat Black

Marlon MB-1250-46 Trailer | Galvanized

Karavan KB-1470-56 Trailer | Galvanized

Your Chesapeake Bay Boating Connection for 50+ years!

Tri-State Marine is proud to offer the full line of EZ Loader Trailers, engineered to be the best recreational boat trailers in the industry – with over 10 industry patents.

Tri-State Marine offers expert sales, fitting and service of the industry’s best recreational boat trailers, exclusively from EZ Loader. For over 65 years, EZ Loader has led the industry in quality, performance, safety, reliability and innovations — continuing to outpace their competitors. All EZ Loader trailers are engineered to be fully adjustable to accommodate most vessels and are built using a heavy-duty frame, the highest quality components and marine-grade hardware with an industrial-grade finish. Simply put, they’re engineered to fit and built to last!

We offer EZ Loader trailers for every boat, every budget, and every body of water — whether EZ Loader roller or bunk style trailers.  We currently stock 7 of the most popular models, or you can custom order a trailer from us where you can choose from galvanized, powder-coated, aluminum, wet-painted systems and "Tuff Coated" Polyurea coatings.  Whether you’re a boating novice or a season fisherman, you’ll find the perfect fit at Tri-State Marine where our advisors will guide you on your selection, while our service technicians will ensure the best fit for your boat.  

Below are a few of our most popular EZ Loader trailers models – designed to safely transport your boat while making it easy to get you into the water. To better understand the full-line of EZ Loader trailers available from Tri-State Marine, please contact us directly for a consultation.

T96RT 23-25/7000

Model:  TEZR 7000

Hull Length: 23 - 25/27'

Weight Capacity:  7000 lb.

No. of Bunks:  64

Axle Style:  Torsion

Tire Size: ST 225/75R 15D

Approx. Width Between Fenders:  76 in.

Approx. Overall Width:  96 in.

Approx. Overall Length:  26 ft. /+ 2 ft.

Approx. Weight:  1859 lb.

80BS14-17/2000

Model: EZ 2000

Hull Length:  14 - 17'

Weight Capacity: 2000 lb.

No. of Bunks: 16

Axle Style: Spring

Tire Size: ST 175/80R 13C

Approx. Width Between Fenders: 64 in.

Approx. Overall Width: 80 in.

Approx. Overall Length: 19 ft.

Approx. Weight: 494 lb.

96RT15-18/2350

Model: EZ 2350

Hull Length:  15 - 18'

Weight Capacity: 2350 lb.

No. of Rollers: 16

Tire Size: SST 205/75R 14C

Approx. Width Between Fenders: 77 in.

Approx. Overall Width: 96 in.

Approx. Overall Length:  20 ft. - 4 in.

Approx. Weight:  672 lb.

T96RT 17-20/4000

Model:  TEZ 4000

Hull Length:  17 - 20/22'

Weight Capacity: 4000 lb.

No. of bunks:  2

Approx. Overall Length:  22.3 ft./+ 1.3 ft.

Approx. Weight:  948 lb.

T96RT 19-22/4700

Model:  TEZL 96 4700

Hull Length:  19 - 22/24'

Weight Capacity: 4700 lb.

No. of Bunks:  32

Axle Style:  Spring

Tire Size:  ST 205/75R 14C

Approx. Overall Length:  25 ft.

Approx. Weight:  1167 lb.

T96RT 19-22/5200

Model:  TEZ

Weight Capacity: 5200 lb.

No. of Bunks:  2

Approx. Overall Length:  25 ft. /+ 1 ft. 6 in.

Approx. Weight:  1119 lb.

T96RT 23-25/5800

Model:  TEZR 5800

Hull Length:  23 - 25/27'

Weight Capacity: 5800 lb.

No. of Bunks:  48

Tire Size:  ST 215/75R 14C

Approx. Overall Length:  26 ft. /+ 2 ft. 

Approx. Weight:  1640 lb.

• Find A Dealer
• Become a Dealer
• Personal Watercraft
• Advice & Support

Boat Trailers

Here’s to smooth sailing, on the water and road.

Ready to securely transport a wide range of boat sizes and types, our trailers are rigorously engineered to be a reliable, quiet and easy-to-tow compliment to your craft.

Durable, Attractive Finishes

Powder coating and galvanized finishes for attractive, lasting protection

SwayControl ™ Engineering

Better handling via welded tubular design and adjustable axles

QuietTow ™ Componentry

Trailer squeak is eliminated with nylon double bushing springs

ShortFree ™ Lighting

Reliability achieved by an all-plug, sealed and fully grounded system

Find the Right Trailer in Three Easy Steps

1. measure the transom-to-bow-eye length, 2. measure the bottom width, 3. calculate carrying capacity.

Single Axle 1250# Bunk Trailer

• Fits small fishing & jon boats

Single Axle 1250# Wide Bunk Trailer

Single Axle 1500# Drift Boat Trailer

• Designed for drift boats
• Step fender

Single Axle 1500# Long Bunk Trailer

• Ideal for longer jon boats

Single Axle 1500# Wide Roller Trailer

• Best with utility V boats
• Great launching & retrieving

Single Axle 1800# Bunk Trailer

• For small deep v & fishing boats
• Galvanized & powder coat options

Single Axle 1800# Custom Bunk Trailer

• For smaller utility V boats
• Design looks sharp with boat

Single Axle 2400# Bunk Trailer

• Fits midsize deep v & fishing boats

Single Axle 2400# Custom Bunk Trailer

• For pleasure & bass boats

Single Axle 3100# Custom Bunk Trailer

• Fits midsize pleasure & bass boats
• Higher capacity for heavier craft

Single Axle 3100# Roller Trailer

• Fits range of midsized boats

Single Axle Aluminum 1700# Bunk Trailer

• For small bay and skiff boats
• Great in coastal areas

Single Axle Aluminum 2450# Bunk Trailer

• Fits small bay & bowrider boats

Single Axle Aluminum 4100# Bunk Trailer

• Fits midsize bay & bowrider boats

Tandem Axle 4800# Bunk Trailer

• Fits large deck & fishing boats
• Tandem disc brakes available

See our complete boat trailer lineup, including detailed specs and key features.

Venture Trailers

Our Boat Trailers

High quality. great value., designed to keep up with all your boating needs, from road to water..

Explore our full inventory of boat trailers manufactured Venture, sorted alphabetically by trailer type. Scroll to the bottom of the list for parts and accessories for your boat trailer.

Aluminum Trailers

Durable, affordable and lightweight. Count on our aluminum trailers to support your boat for years to come.

Bunk Trailers

If you’re looking for an affordable and easy-to-maintain trailer, bunk trailers may be for you.

Commander Line

Venture Trailers Commander Series is built for the long haul with premium features that every experienced boater could want. Each comes equipped with sleek, high-end features that come standard with every model.

Avoid corrosion on all your excursions with a galvanized trailer. Our complete galvanized trailer line comes in a range of sizes and configurations.

Personal Watercraft Trailer

Secure your PWC with a Venture Trailers Personal Watercraft Trailer. Our single or tandem trailers make transporting a breeze.

Pontoon Trailers

We have a wide variety of pontoon trailers that support your boat, from 16 feet to 26 feet in length.

Roller Trailers

Roller trailers are perfect for easy loading and unloading on shallow ramps or low tides.

Skiff and Jon Boat Trailers

Perfect for small boats, our Skiff and Jon Boat Trailers are made to carry lightweight loads for seamless loading and launching.

Tritoon Trailers

Get the support your boat needs with our strong and dependable tritoon trailers.

Boat Trailer Accessories

Give your trailer the upgrade it deserves. Find out more about Venture's full line of boat trailer accessories including aluminum wheels, dual well tongue jacks, electric brakes, stainless steel brakes, keel rollers, LED lights, bunk covers and more.

Commander Series Trailers

Our new Commander Series is the ultimate high-end trailer experience every boater could want. Engineered with the finest materials, each trailer comes standard with premium features.

Need help choosing the right trailer?

We’re here to help. Check out our Buying Guide for interactive tools and resources that can help you pick the right trailer for your boat.

PROTECTING YOUR INVESTMENT SINCE 1959

Serving the Western USA, Western Canada and Alaska the Tuff Trailer Way

Give us a Call or Email Us for Your Free Estimate

We offer free estimates and a five-year manufacturer's warranty on brakes.

Aluminum Boat Trailers

We are your ideal source for aluminum boat trailers that deliver. As the largest manufacturer of boat trailers in the Pacific Northwest, we take pride in excellent customer service. Contact us for more information about aluminum, galvanized or painted boat trailers.

Tuff Trailer is the premier provider of maintenance-free boat trailers for recreational, commercial, and government use. We can custom build your trailer in as little as three weeks, so you can have your trailer quickly and according to your specifications.

Galvanized Boat Trailers

Our one-piece fully welded hot dip galvanized boat trailers are truly a Tuff Trailer. Starting with trailers small enough to fit a 15-foot boat, with a 2,600-pound load capacity, all the way up to a 36-foot boat, with a load capacity of 18,200 pounds. We specialize in building trailers for very large boats up to 55-feet and load ratings up to 60,000 pounds. We also build trailers for sailboats, catamarans, pontoon boats, and more.

Painted Steel Boat Trailers

When you want the best in quality, durability, and performance, look no further than our state-of-the-art painted steel boat trailers. We take pride in designing and fabricating superior boat trailers that adhere to the highest industry standards. We also supply quality parts.

We have boat trailers of every type for outboards, inboards, catamarans, landing craft, sailboats, and more. We offer a five-year manufacturer's WARRANTY on vault bearing systems. We offer FREE estimates as well. Get in touch with us now. 

Warranty All Trailers for Two Years

We supply aluminum, galvanized, painted boat trailers and painted utility trailer.

Company History

Tuff Trailer is one of the largest Pacific Northwest boat trailer manufacturers. We have been in business since 1959. The company was initially named Magnum but changed in the early 2000’s to Tuff Trailer. With this change came a focus on building the world’s best aluminum, galvanized and painted boat trailers.

Custom Built to Order

We use our customer’s specifications, building customized trailers for the recreational, commercial, and governmental markets. We build boat trailers that fit every hull type, from monohulls to sailboats, catamarans, tritoons and more. Our standard trailers, from 15-foot 2,500 lb. capacity to 36-foot 18,200 lb. capacity, come with a variety of optional accessories that can fill your boating needs.

We also build some longer, higher capacity boat trailers. If you are interested in one of these, please give us a call at 360-398-0300.

As stated above, our goal is to build the best boat trailers in the world. We invite you to visit us and decide for yourself if we have achieved this goal. Please give us a call to arrange a tour. We look forward to seeing you.

A 4.5 % charge will be added to any credit card purchase over $1000 where appropriate.

360-398-0300

Our Facebook Feeds

Tuff Trailer

Address: 6742 Portal Way

Ferndale, Washington 98248

Phone: 360-398-0300

Email: [email protected]

Wire Transfer  

BUSINESS HOURS

Tuff Trailer | All Rights Reserved

Posted 2024-06-05 15:35

Contact Information:

21' Boat for sale and Trailer - $7,999 (Tiverton)

QR Code Link to This Post

post id: 7754127571

posted: 2024-06-05 15:35

♥ best of [ ? ]

refresh the page.

21' Boat for sale and Trailer - boats - by owner - marine sale -...

Selling a 1994 Seaswirl Striper 210 (21’), 1994 noreaster trailer, In 2012 the motor was replaced with a refurbished 1995 Yamaha 175hp from Toni’s Marine. All wiring was also redone at that time....