two masted sailboat with a taller mainmast

What’s a Boat with Two Masts Called: Two masted sailing boat types

Two-masted sailing boats will always have a special place in the hearts of many sailors. Many sailors consider two-masted sailing boats to be the most attractive and graceful of all sailing vessels. They have an obvious elegance, but what do you know about these two masted sailboats? Let’s find out!

Among the most important aspects are the fact that two-masted sailing boats offer greater sail balance, engineless sailing and more heavy weather options.

Even if the two masted sailboats are not so common, the sailing world has a few of them and what is more, they represent a proof of the evolution and improvement of sailing boats over time. There are an almost endless number of ways sailors have arranged their sails on boats over the years.

Two-masted sailing boats are classified according to the size and position of their masts.

There are different two-masted sailing boat types and two of the most popular are schooners and yawls.

The origins of schooner-rigged vessels are unknown, however there is evidence of them in paintings by Dutch maritime painters dating back to the early 17th century.

Schooners were developed by Northern European countries, while yawls are believed to be descended from the fishing boats of England.

Sailboats with two masts include yawls, ketches, schooners and brigs (known as brigantines). Yawls and ketches are both types of sloops, which means they have one mast, but the difference between them is that the yawl has a second mast stepped at the bow.

Ketches and Yawls have a lower mast, unlike schooners that have a taller aft mast, which is also known as mizzen. Ketch sailing boats have something specific: the aft mast is located in front of the rudder post.

The yawl’s mizzenmast serves as a counterbalance for the jib sails, so that it doesn’t have to be hung from the forestay (the rope running from the top of the mast down to the deck). They’re usually smaller than ketches and have less rigging because they don’t carry as many sails as a sloop with two masts.

Yawls are faster sailboats than schooners because they’re lighter, more balanced and easier to sail upwind. They can also go faster because their shorter sails catch more wind. But schooners have larger payloads, which means more people or cargo — an important consideration for long trips without resupply.

Schooners are two-masted sailing boats, but instead of having a jib sail like yawls, ketches and most sloops, schooners have a fore-and-aft spanker sail like a gaff sailboat. These two-masted sailboats have at least two masts, the foremast being slightly shorter than the main mast.

Schooners are larger than yawls, ketches and other sloops and weren’t used very much in modern times because they were more difficult to handle. They’re still used in racing competitions today.

Schooners have a longer bow portion than yawls. The mainsail is aft of the mast, and either one or two foresails are in front of it. In a schooner, these are triangular sails; in a yawl, they’re trapezoidal. Yawls have bowsprits — poles that extend beyond the bow for the jib and stay sail to be attached. Schooners have small bowsprits that can support jibs but not large sails.

The term ketch derives from the word catch, which hints to how it got its name in the 17th century. Ketches were initially intended to meet the specific requirements of offshore net fishing.

Taller masts allow you to use larger sails, so ketch boats are able to achieve better speeds than similar boats with only one mast. Some ketch designs feature a gaff rig, which is similar to a yawl, while others feature a yawl rig, which looks like a traditional sloop.

Ketch boats may look easy to sail but the slightest mistake can lead to disaster. You must be careful when operating this type of boat because it does not have as much stability as other boats, especially when you’re manoeuvring in tight quarters or windy conditions.

A ketch may also be a small recreational boat with only one head-sail in use. Many modern designs have moved away from sail altogether and are powered by engine, while others use both sails as well as engines depending on circumstance.

The brigantine was once a tiny ship that carried both oars and sails. It was a favorite of Mediterranean pirates.

A brigantine is a square-rigged sailing boat with two masts, with a fully square-rigged foremast and two sails on the mainmast.

The mainmast is stepped forward of the deck, making it possible to sail into the wind using a triangular headsail known as a jib. The brig’s foremast is shorter than the mainmast.

The name of this type of boat with 2 masts is derived from the Italian word “brigantino”, which means brigand.

Also, this two-masted sailing boat type was most commonly used for coastal trade and pirate hunting. The brigantine had an advantage over other ships of the time because it could sail against the wind using both sails, making it easier to travel against strong winds.

Faster and easier to manoeuvre than a sloop or schooner, it was used for piracy and espionage.

FAQ: Two-Masted Sailboats

What do you call a two-masted sailboat.

Two-masted sailboats are of several types: yawls, schooners, ketches or brigantines.

Why do some sailboats have two masts?

The vast majority of sailboats feature a mainsail and a jib. These two-masted sailboats provide several advantages in terms of speed and maneuverability. These two masts may be configured in a variety of ways.

The foresail directs air beyond the back of the mainsail, generating greater power from the wind. In order to help menouvering, the foresail can be backed. So, adding sails makes things simpler for bigger boats, making them easier to handle in heavy winds.

What is the difference between a ketch and a yawl sailboat?

Because they are lighter, more balanced, and easier to sail upwind, yawls are faster sailboats than schooners. They can also go at a faster speed since their shorter sails collect more wind. Schooners, on the other hand, have higher cargoes, which means more people or freight – a crucial consideration for extended journeys without replenishing.

What is a one masted sailboat?

It's a sailing boat having a single mast roughly one-third the length's aft of the bow. A sailboat with a single mast usually has one headsail in front of the mast and one mainsail behind the mast.

What is a two-masted square rigger?

It's a brig with two square-rigged masts. A gaff-rigged fore-and-aft sail also called a "mizzen" is used in addition to jibs and staysails (stays'ls) before the foremast and staysails between the masts.

7 Popular Sailboats with Two Masts (With Pictures & Prices)

Sailboats can come with one, two, or even more masts. You can also have different-sized masts placed on the front, back, or middle of your vessel.

Below, I have listed popular sailboats that have two masts.

Let’s get started!

Table of Contents

Check also: Average sailboat price examples .

Things to Know About Sailboats With Two Masts

When looking for sailboats with two masts, you should know what you are looking for. A Ketch is one type of sailboat with two masts.

Knowing this term can help you to nail down your search when looking for a boat with two masts.

These boats come in many shapes and sizes as well as many different types of designs. Generally, these types of boats have the taller mast being forward and the smaller mast near the aft.

Yawls are also boats that feature two masts.

These also come in multiple types and designs. The difference between the Ketch and the Yawl is that the Yawl has the larger mast in the aft instead of forward. They also have smaller sails and can be easier to handle.

Another type of sailing ship that features two masts is a Brigantine.

This ship has mixed sailing rigs which commonly features squared sails on the front part of the ship and triangular sails on the back of the ship.

These boats are often larger and require more people to handle them.

7 Great Used Boats with Two Masts

There are many benefits to used boats including a lower cost. You can get a larger boat for a lower cost if you choose to buy used.

When looking at used boats, you need to make sure you look at the boat and its features thoroughly to make sure everything is in great working order.

If you do not feel confident that you can properly look over a used vessel, you can even hire a marine inspector to look it over and let you know of any potential issues or needed repairs. You can use this assessment to decide what is worth it, or if the needed repairs fall into the budget.

It is much more common for a used boat to have more than one mast. This is because the newer sailboat models are creating their new designs with just one mast.

One mast ships are easier to handle and manage so new designs are trying to optimize design and ease of sailing.

Below are great used sailboats with two masts which I have arranged by price .

1. 1976 Westerly Center Cockpit Ketch

two masted sailboat with a taller mainmast

This 1976 Westerly Center Cockpit Ketch is a small 36-foot long sailboat with two masts. This is a solidly built cruising vessel that features a center cockpit ketch layout.

This boat has a small 38 horsepower engine perfectly fit to navigate its smaller size.

The interior features 1 single berth and 3 double berths all in 3 cabins. This boat also has 2 full heads onboard.

You also have a full galley with a 4 burner stove, refrigerator and freezer, stainless steel sink, and microwave oven.

This boat makes great use of limited space and offers many amenities in a much smaller frame.

Price: $37,000.00

2. 1978 Jeanneau Gin Fizz

The 1978 Jeanneau Gin Fizz is a trusted and popular two-masted design capable of crossing the Atlantic Ocean .

This boat is also very spacious for a boat that is only 38 feet in length. This model also won an award for “security, comfort, ease of handling, and ability to handle varying conditions.”

This particular used model has been well maintained and upgraded over the years.

This boat is great for family cruising, offshore passages, and even racing.

This boat features a 50 horsepower engine to help navigation.

Inside you can find 2 cabins and 1 head. You will be highly comfortable with air conditioning and other interior luxuries.

Price: $46,000.00

3. 1979 Freedom 40

The Freedom 40 is a classically designed centerboard ketch with two masts. This boat is a great sailor loaded for cruising on the wide-open blue water.

This sailboat is 40 feet in length and features accommodations for six people that include a double-v berth, another double berth, and two single berths.

There is also a full head that can be accessed both from the main salon and aft cabin.

This boat was recently painted and features newer interior fabrics, forced air heating, and much more.

You can find a dinette with separate freezer and refrigeration compartments, a stove with an oven and broiler, a double stainless steel sink, plenty of storage, and other interior features.

This boat also comes with an outboard motor with 50 horsepower and a hard bottom inflatable dinghy.

Price: $54,900.00

4. 1977 Puma 38 Ketch

The Puma 38 Ketch is a two-masted sailboat built for racing like the rest of the Puma sailing line. This brand prides itself on speed and maneuverability.

The 1977 Puma 38 is 34 feet in length with a backup diesel engine that can help you get where you need to go as well as docking into a slip. This motor features more horsepower than the average sailboat with 45 horsepower.

Features on this vessel include autopilot, electrical and manual bilge pumps, a full marine head, running hot water, and refrigerator.

This boat is made of fiberglass with teak finishes and looks well kept. You can find this boat in Spain if you are interested in purchasing it.

Price: $66,099.00

5. 1973 Morgan Out Island 41

Originally designed by Charley Morgan, the Morgan Out Island 41 is a center cockpit shoal-draft cruiser that features two masts.

This larger boat is 41 feet 3 inches in length and features many amenities.

This boat is the tri-cabin version and features interior heating, pressurized hot and cold water, a 2 burner gas oven, and a fridge.

This boat also seats up to 7 in the 3 cabins and the saloon. There are also 2 full heads on this vessel.

This boat is even equipped with an inboard motor . Inboard motors are easier when it comes to navigation including backing up, which is generally hard for sailboats to do.

Price: $68,596.00

6. 1970 Hinckley Bermuda 40

This 1970 Hinckley Bermuda 40 is a gorgeous two-masted boat painted with a mixture of desert sand and oyster white on the exterior and features a beautiful and well-kept deck.

This boat has previously had all her systems replaced and upgraded and features a 40 horsepower engine that was new in 2014.

This boat features a mahogany interior and sleeps up to 6 people in 2 cabins. You can also find a 3 burner propane stove with oven, fridge and compressor, new countertops and plenty of storage.

This boat is a stunning and highly upgraded “must-see” at a very reasonable price.

Price: $129,500.00

7. 1995 Amel Super Maramu

A newer model of sailboat is the 1995 Amel Super Maramu sailboat. This sailboat has two masts and is very long at 53 feet.

This boat features an aft deck, steps molded right into the hull, well-protected cockpit an many other features. This boat has a large 76 horsepower engine which is more than the average sailboat is equipped with.

Inside, this boat features 2 cabins and 2 heads with showers. There is also plenty of storage, air conditioning , and electric heaters. There is also a nice salon and galley with a refrigerator, dishwasher, chest freezer, microwave oven, 3 burner stove, and other appliances.

This boat is great for multiple days out on the water and is new and updated. Because of the year, this was manufactured and the features, this boat has a larger price tag than the previous models.

Price: $299,990.00

Final Thoughts:

Sailboats are a great way to enjoy a day out at sea. Most sailboat models come with sleeping arrangements and even a kitchen. This makes them ideal for trips that will take more than a day.

Having multiple masts allows you to harness the power of the wind better and can increase your speed and directional capabilities.

There are many great choices when it comes to boats with two masts, but newer models are starting to steer away from double mast designs. This does not mean that you cannot get a good boat with two masts.

Used boats can be great choices when it comes to purchasing a boat. This is even more true with large, yacht boats such as the ones listed above.

Just make sure when you buy a used sailboat you check that everything is intact and in good working order and if it is not, you have allotted space in the budget to fix what is needed.

Your new double-masted sailboat should provide you with plenty of long-lasting memories and adventures out on the water while you connect with the wind and the sea.

Click to share...

Guide to Understanding Sail Rig Types (with Pictures)

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

What are the different types of sail rig? The sail rig is determined by the number of masts and the layout and shape of sails. Most modern ships are fore-and-aft rigged, while old ships are square-rigged. Rigs with one mast are sloops and cutters. Ketches, yawls, brigs, and schooners have two masts. Barques have three masts. Rigs can contain up to seven masts.

'Yeah, that's a gaff brig, and that a Bermuda cutter' - If you don't know what this means (neither did I) and want to know what to call a two-masted ship with a square-rigged mainsail, this article is definitely for you.

Sailboat in front of NYC with Bermuda mainsail and Jib

The Ultimate Guide to Sail Types and Rigs (with Pictures)

First of all, what is a sail rig? A sail rig is the way in which the sails are attached to the mast(s). In other words, it's the setup or configuration of the sailboat. The rig consists of the sail and mast hardware. The sail rig and sail type are both part of the sail plan. We usually use the sail rig type to refer to the type of boat.

Let's start by taking a look at the most commonly used modern sail rigs. Don't worry if you don't exactly understand what's going on. At the end of this article, you'll understand everything about rig types.

Diagram of most common rig types (Bermuda sloop, gaff cutter, gaff ketch, gaf schooner, full rigged ship)

The sail rig and sail plan are often used interchangeably. When we talk of the sail rig we usually mean the sail plan . Although they are not quite the same. A sail plan is the set of drawings by the naval architect that shows the different combinations of sails and how they are set up for different weather conditions. For example a light air sail plan, storm sail plan, and the working sail plan (which is used most of the time).

So let's take a look at the three things that make up the sail plan.

The 3 things that make up the sail plan

I want to do a quick recap of my previous article. A sail plan is made up of:

Mast configuration - refers to the number of masts and where they are placed
Sail type - refers to the sail shape and functionality
Rig type - refers to the way these sails are set up on your boat

I'll explore the most common rig types in detail later in this post. I've also added pictures to learn to recognize them more easily. ( Click here to skip to the section with pictures ).

How to recognize the sail plan?

So how do you know what kind of boat you're dealing with? If you want to determine what the rig type of a boat is, you need to look at these three things:

Check the number of masts, and how they are set up.
You look at the type of sails used (the shape of the sails, how many there are, and what functionality they have).
And you have to determine the rig type, which means the way the sails are set up.

Below I'll explain each of these factors in more detail.

The most common rig types on sailboats

To give you an idea of the most-used sail rigs, I'll quickly summarize some sail plans below and mention the three things that make up their sail plan.

Bermuda sloop - one mast, one mainsail, one headsail, fore-and-aft rigged
Gaff cutter - one mast, one mainsail, two staysails, fore-and-aft rigged
Gaff schooner - two-masted (foremast), two mainsails, staysails, fore-and-aft rigged
Gaff ketch - two-masted (mizzen), two mainsails, staysails, fore-and-aft rigged
Full-rigged ship or tall ship - three or more masts, mainsail on each mast, staysails, square-rigged

The first word is the shape and rigging of the mainsail. So this is the way the sail is attached to the mast. I'll go into this later on. The second word refers to the mast setup and amount of sails used.

Most sailboats are Bermuda sloops. Gaff-rigged sails are mostly found on older, classic boats. Square-rigged sails are generally not used anymore.

But first I want to discuss the three factors that make up the sail plan in more detail.

Ways to rig sails

There are basically two ways to rig sails:

From side to side, called Square-rigged sails - the classic pirate sails
From front to back, called Fore-and-aft rigged sails - the modern sail rig

Almost all boats are fore-and-aft rigged nowadays.

Square sails are good for running downwind, but they're pretty useless when you're on an upwind tack. These sails were used on Viking longships, for example. Their boats were quicker downwind than the boats with fore-and-aft rigged sails, but they didn't handle as well.

The Arabs first used fore-and-aft rigged sails, making them quicker in difficult wind conditions.

Quick recap from part 1: the reason most boats are fore-and-aft rigged today is the increased maneuverability of this configuration. A square-rigged ship is only good for downwind runs, but a fore-and-aft rigged ship can sail close to the wind, using the lift to move forward.

The way the sails are attached to the mast determines the shape of the sail. The square-rigged sails are always attached the same way to the mast. The fore-and-aft rig, however, has a lot of variations.

The three main sail rigs are:

Bermuda rig - most used - has a three-sided (triangular) mainsail
Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
Lateen rig - has a three-sided (triangular) mainsail on a long yard

The Bermuda is the most used, the gaff is a bit old-fashioned, and the lateen rig is outdated (about a thousand years). Lateen rigs were used by the Moors. The Bermuda rig is actually based on the Lateen rig (the Dutch got inspired by the Moors).

Diagram of lateen, gaff, and bermuda rig

Other rig types that are not very common anymore are:

Junk rig - has horizontal battens to control the sail
Settee rig - Lateen with the front corner cut off
Crabclaw rig

Mast configuration

Okay, we know the shape of the mainsail. Now it's time to take a look at the mast configuration. The first thing is the number of masts:

one-masted boats
two-masted boats
three-masted boats
four masts or up
full or ship-rigged boats - also called 'ships' or 'tall ships'

I've briefly mentioned the one and two mast configurations in part 1 of this article. In this part, I'll also go over the three-masted configurations, and the tall ships as well.

A boat with one mast has a straightforward configuration because there's just one mast. You can choose to carry more sails or less, but that's about it.

A boat with two masts or more gets interesting. When you add a mast, it means you have to decide where to put the extra mast: in front, or in back of the mainmast. You can also choose whether or not the extra mast will carry an extra mainsail. The placement and size of the extra mast are important in determining what kind of boat we're dealing with. So you start by locating the largest mast, which is always the mainmast.

From front to back: the first mast is called the foremast. The middle mast is called the mainmast. And the rear mast is called the mizzenmast.

Diagram of different mast names (foremast, mainmast, mizzenmast)

What is the mizzenmast? The mizzenmast is the aft-most (rear) mast on a sailboat with three or more masts or the mast behind the mainmast on a boat with two masts. The mizzenmast carries the mizzen sail. On a two-masted boat, the mizzenmast is always (slightly) smaller than the mainmast. What is the purpose of the mizzen sail? The mizzen sail provides more sail area and flexibility in sail plan. It can be used as a big wind rudder, helping the sailor to have more control over the stern of the ship. It pushes the stern away from the wind and forces the bow in the opposite way. This may help to bring the bow into the wind when at anchor.

I always look at the number of masts first, because this is the easiest to spot. So to make this stuff more easy to understand, I've divided up the rig types based on the number of masts below.

Why would you want more masts and sail anyways?

Good question. The biggest advantage of two masts compared to one (let's say a ketch compared to a sloop), is that it allows you to use multiple smaller sails to get the same sail area. It also allows for shorter masts.

This means you reduce the stress on the rigging and the masts, which makes the ketch rig safer and less prone to wear and tear. It also doesn't capsize as quickly. So there are a couple of real advantages of a ketch rig over a sloop rig.

In the case of one mast, we look at the number of sails it carries.

Boats with one mast can have either one sail, two sails, or three or more sails.

Most single-masted boats are sloops, which means one mast with two sails (mainsail + headsail). The extra sail increases maneuverability. The mainsail gives you control over the stern, while the headsail gives you control over the bow.

Sailor tip: you steer a boat using its sails, not using its rudder.

The one-masted rigs are:

Cat - one mast, one sail
Sloop - one mast, two sails
Cutter - one mast, three or more sails

Diagram of one-masted rigs (bermuda cat, bermuda sloop, gaff cutter)

The cat is the simplest sail plan and has one mast with one sail. It's easy to handle alone, so it's very popular as a fishing boat. Most (very) small sailboats are catboats, like the Sunfish, and many Laser varieties. But it has a limited sail area and doesn't give you the control and options you have with more sails.

The most common sail plan is the sloop. It has one mast and two sails: the main and headsail. Most sloops have a Bermuda mainsail. It's one of the best racing rigs because it's able to sail very close to the wind (also called 'weatherly'). It's one of the fastest rig types for upwind sailing.

It's a simple sail plan that allows for high performance, and you can sail it short-handed. That's why most sailboats you see today are (Bermuda) sloops.

This rig is also called the Marconi rig, and it was developed by a Dutch Bermudian (or a Bermudian Dutchman) - someone from Holland who lived on Bermuda.

A cutter has three or more sails. Usually, the sail plan looks a lot like the sloop, but it has three headsails instead of one. Naval cutters can carry up to 6 sails.

Cutters have larger sail area, so they are better in light air. The partition of the sail area into more smaller sails give you more control in heavier winds as well. Cutters are considered better for bluewater sailing than sloops (although sloops will do fine also). But the additional sails just give you a bit more to play with.

Two-masted boats can have an extra mast in front or behind the mainmast. If the extra mast is behind (aft of) the mainmast, it's called a mizzenmast . If it's in front of the mainmast, it's called a foremast .

If you look at a boat with two masts and it has a foremast, it's most likely either a schooner or a brig. It's easy to recognize a foremast: the foremast is smaller than the aft mast.

If the aft mast is smaller than the front mast, it is a sail plan with a mizzenmast. That means the extra mast has been placed at the back of the boat. In this case, the front mast isn't the foremast, but the mainmast. Boats with two masts that have a mizzenmast are most likely a yawl or ketch.

The two-masted rigs are:

Lugger - two masts (mizzen), with lugsail (a cross between gaff rig and lateen rig) on both masts
Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast is much taller than mizzen. Mizzen without a mainsail.
Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
Bilander - two masts (foremast). Has a lateen-rigged mainsail and square-rigged sails on the foremast and topsails.
Brig - two masts (foremast), partially square-rigged. The main mast carries small lateen-rigged sail.

Diagram of two-masted rigs (gaff yawl, gaff ketch, gaff schooner, and brig)

The yawl has two masts that are fore-and-aft rigged and a mizzenmast. The mizzenmast is much shorter than the mainmast, and it doesn't carry a mainsail. The mizzenmast is located aft of the rudder and is mainly used to increase helm balance.

A ketch has two masts that are fore-and-aft rigged. The extra mast is a mizzenmast. It's nearly as tall as the mainmast and carries a mainsail. Usually, the mainsails of the ketch are gaff-rigged, but there are Bermuda-rigged ketches too. The mizzenmast is located in front of the rudder instead of aft, as on the yawl.

The function of the ketch's mizzen sail is different from that of the yawl. It's actually used to drive the boat forward, and the mizzen sail, together with the headsail, are sufficient to sail the ketch. The mizzen sail on a yawl can't really drive the boat forward.

Schooners have two masts that are fore-and-aft rigged. The extra mast is a foremast which is generally smaller than the mainmast, but it does carry a mainsail. Schooners are also built with a lot more masts, up to seven (not anymore). The schooner's mainsails are generally gaff-rigged.

The schooner is easy to sail but not very fast. It handles easier than a sloop, except for upwind, and it's only because of better technology that sloops are now more popular than the schooner.

The brig has two masts. The foremast is always square-rigged. The mainmast can be square-rigged or is partially square-rigged. Some brigs carry a lateen mainsail on the mainmast, with square-rigged topsails.

Some variations on the brig are:

Brigantine - two masts (foremast), partially square-rigged. Mainmast carries no square-rigged mainsail.

Hermaphrodite brig - also called half brig or schooner brig. Has two masts (foremast), partially square-rigged. Mainmast carries a gaff rig mainsail and topsail, making it half schooner.

Three-masted boats are mostly barques or schooners. Sometimes sail plans with two masts are used with more masts.

The three-masted rigs are:

Barque - three masts, fore, and mainmast are square-rigged, the mizzenmast is usually gaff-rigged. All masts carry mainsail.
Barquentine - three masts, foremast is square-rigged, the main and mizzenmast are fore-and-aft rigged. Also called the schooner barque.
Polacca - three masts, foremast is square-rigged, the main and mizzenmast are lateen-rigged.
Xebec - three masts, all masts are lateen-rigged.

Diagram of three-masted rigs (barque, full rigged ship)

A barque has three or four masts. The fore and mainmast are square-rigged, and the mizzen fore-and-aft, usually gaff-rigged. Carries a mainsail on each mast, but the mainsail shape differs per mast (square or gaff). Barques were built with up to five masts. Four-masted barques were quite common.

Barques were a good alternative to full-rigged ships because they require a lot fewer sailors. But they were also slower. Very popular rig for ocean crossings, so a great rig for merchants who travel long distances and don't want 30 - 50 sailors to run their ship.

Barquentine

The barquentine usually has three masts. The foremast is square-rigged and the main and mizzenmast fore-and-aft. The rear masts are usually gaff-rigged.

Faster than a barque or a schooner, but the performance is worse than both.

The polacca or polacre rig has three masts with a square-rigged foremast. The main and mizzenmast are lateen-rigged. Beautiful boat to see. Polacca literally means 'Polish' (it's Italian). It was a popular rig type in the Mediterranean in the 17th century. It looks like the xebec, which has three lateen-rigged masts.

Fun fact: polaccas were used by a Dutch sailor-turned-Turkish-pirate (called Murat Reis).

The xebec is a Mediterranean trading ship with three masts. All masts are lateen-rigged. I couldn't find any surviving xebecs, only models and paintings. So I guess this rig is outdated a long time.

A boat with three or more masts that all carry square-rigged sails is called a ship, a tall ship, or a full-rigged ship. So it's at this point that we start calling boats 'ships'. It has nothing to do with size but with the type of rigging.

More sails mean less stress on all of them. These ships use a lot of sails to distribute the forces, which reduces the stress on the rigging and the masts. Square sails mean double the sail area in comparison to triangular sails.

They are quite fast for their size, and they could outrun most sloops and schooners (schooners were relatively a lot heavier). The reason is that tall ships could be a lot longer than sloops, giving them a lot of extra hull speed. Sloops couldn't be as large because there weren't strong enough materials available. Try making a single triangular sail with a sail area of over 500 sq. ft. from linen.

So a lot of smaller sails made sense. You could have a large ship with a good maximum hull speed, without your sails ripping apart with every gust of wind.

But you need A LOT of sailors to sail a tall ship: about 30 sailors in total to ie. reef down sails and operate the ship. That's really a lot.

Tall ships are used nowadays for racing, with the popular tall ship races traveling the world. Every four years I go and check them out when they are at Harlingen (which is very close to where I live).

Check out the amazing ships in this video of the tall ship races last year near my hometown. (The event was organized by friends of mine).

What is the difference between a schooner and a sloop? A schooner has two masts, whereas the sloop only has one. The schooner carries more sails, with a mainsail on both masts. Also, sloops are usually Bermuda-rigged, whereas schooners are usually gaff-rigged. Most schooners also carry one or two additional headsails, in contrast to the single jib of the sloop.

What do you call a two-masted sailboat? A two-masted sailboat is most likely a yawl, ketch, schooner, or brig. To determine which one it is you have to locate the mainmast (the tallest). At the rear: schooner or brig. In front: yawl or ketch. Brigs have a square-rigged foremast, schooners don't. Ketches carry a mainsail on the rear mast; yawls don't.

What is a sloop rig? A sloop rig is a sailboat with one mast and two sails: a mainsail and headsail. It's a simple sail plan that handles well and offers good upwind performance. The sloop rig can be sailed shorthanded and is able to sail very close to the wind, making it very popular. Most recreational sailboats use a sloop rig.

What is the difference between a ketch and a yawl? The most important difference between a ketch and a yawl are the position and height of the mizzenmast. The mizzenmast on a yawl is located aft of the rudder, is shorter than the mainmast and doesn't carry a mainsail. On a ketch, it's nearly as long as the mainmast and carries a mainsail.

Pinterest image for Guide to Understanding Sail Rig Types (with Pictures)

There are a wonderful lots of DIY changeability shows on the cable airwaves these days.

Rick the rigger

There are SO many errors on this site it really should be taken down.

First major mistake is to say you are no longer afraid of the sea.

One that truly gets up my nose is the term ‘fully’ rigged ship. It’s a FULL rigged ship!! Your mast names are the wrong way round and just because there may be 3 it doesn’t automatically mean the one in the middle is the main.

I could go on and totally destroy your over inflated but fragile ego but I won’t. All I will say is go learn a lot more before posting.

Shawn Buckles

Thanks for your feedback. If you like to point out anything more specific, please let me know and I will update the articles. I’ve changed fully-rigged to full-rigged ship - which is a typo on my part. I try to be as concise as I can, but, obviously, we all make mistakes every now and then. The great thing about the internet is that we can learn from each other and update our knowledge together.

If you want to write yourself and share your knowledge, please consider applying as a writer for my blog by clicking on the top banner.

Thanks, Shawn

Well, I feel that I’ve learned a bit from this. The information is clear and well laid out. Is it accurate? I can’t see anything at odds with the little I knew before, except that I understood a xebec has a square rigged centre mainmast, such as the Pelican ( https://www.adventureundersail.com/ )

Hi, Shawn, You forgot (failed) to mention another type of rig? The oldest type of rig known and still functions today JUNK RIG!

Why are so many of the comments here negative. I think it is wonderful to share knowledge and learn together. I knew a little about the subject (I’m an Aubrey-Maturin fan!) but still found this clarified some things for me. I can’t comment therefore on the accuracy of the article, but it seems clear to me that the spirit of the author is positive. We owe you some more bonhomme I suggest Shawn.

As they say in the Navy: “BZ” - for a good article.

Been reading S.M. Stirling and wanted to understand the ship types he references. Thank you, very helpful.

This site is an awesome starting point for anyone who would like to get an overview of the subject. I am gratefull to Shawn for sharing - Thanks & Kudos to you! If the negative reviewers want to get a deeper technical knowledge that is accurate to the n-th then go study the appropriate material. Contribute rather than destroy another’s good work. Well done Shawn. Great job!

Good stuff Shawn - very helpful. As a novice, it’s too confusing to figure out in bits and pieces. Thanks for laying it out.

First of all I have to say that Rick ‘the rigger’ is obviously the one with the “over inflated but fragile ego” and I laughed when you suggested he share his knowledge on your blog, well played!

As for the content it’s great, hope to read more soon!

Alec Lowenthal

Shawn, I have a painting of a Spanish vessel, two masted, with. Lateen sails on both masts and a jib. The mainsail is ahead of the main mast (fore) and the other is aft of the mizzen mast. Would this be what you call lugger rig? I have not seen a similar picture. Thanks, Alec.

Thank you for your article I found easy to read and understand, and more importantly remember, which emphasises the well written.. Pity about the negative comments, but love your proactive responses!

This vessel, “SEBASTIAN” out of Garrucha, Almería, España, was painted by Gustave Gillman in 1899.

Sorry, picture not accepted!

Thank you for a very informative article. I sail a bit and am always looking for more knowledge. I like the way you put forth your info and I feel if you can’t say anything positive, then that person should have their own blog or keep their opinions to their-self. I will be looking for more from you. I salute your way of dealing with negative comments.

Thank you for a great intro to sailing boats! I searched different sailboats because I use old sails tp make bags and wanted to learn the difference. Way more than I ever expected. Thanks for all the work put in to teach the rest of us.

Your description of a cutter is lacking, and your illustrations of “cutters” are actually cutter-rigged sloops. On a true cutter, the mast is moved further aft (with more than 40% of the ship forward of the mast). A sloop uses tension in the backstay to tension the luff of the foresail. The cutter can’t do this.

Also, a bermuda-rigged ketch will have a line running from the top of the mainmast to the top of the mizzenmast.

wow great guide to rig types! thanks

Interesting guide, however I am confused about the description of the brig. You say the main mast on a brig can have a lateen sail, but in your picture it looks like a gaff sail to me. How is it a lateen sail?

Hi Shawn, thank you for taking the time to share this information. It is clear and very helpful. I am new to sailing and thinking of buying my own blue water yacht. The information you have supplied is very useful. I still am seeking more information on performance and safety. Please keep up the good work. Best Regards

mickey fanelli

I’m starting to repair a model sailboat used in the lake I have three masts that have long been broken off and the sails need replacement. So my question is there a special relationship between the three masts I do have reminents of where the masts should go. they all broke off the boat along with the sails I can figure out where they go because of the old glue marks but it makes no sense. or does it really matter on a model thank you mickey

Cool, total novice here. I have learnt a lot. Thanks for sharing - the diagrams along with the text make it really easy to understand, especially for a beginner who hasn’t even stepped on a sailing boat.

Daryl Beatt

Thank you. Cleared up quite a few things for me. For example, I was familiar with the names “Xebecs” and “Polaccas” from recent reading about the Barbary War. I had gathered that the two Barbary types were better suited to sailing in the Med, but perhaps they were less able to be adaptable to military uses,(but one might assume that would be ok if one plans to board and fight, as opposed to fight a running gun duel). Specifically, the strangely one sided August 1, 1801 battle between the USS Enterprise under Lt. John Sterett and the Polacca cruiser Tripoli under Admiral Rais Mahomet Rous. On paper both ships seemed nearly equal in size, guns and crew, but pictures of the battle are confusing. While the Enterprise is usually rendered as the familiar schooner, the polacca Tripoli has been pictured in radically different ways. Thus the Wikipedia picture by Hoff in 1878 used to illustrate the Battle shows a Brig design for Tripoli, indicating 77 years later, polaccas were no longer common.

Lee Christiansen

I am curious as to what you would call a modern race boat with a fractional jib,not equipped for full masthead hoist? Thanks Lee

Thanks Guy: The information and pictures really eliminate a lot of the mystery of the terminology and the meanings. Also appreciate the insight of the handling idiosyncrasies “hand” (staff) requirements to manage a vessel for one that has not been on the water much. I long to spend significant time afloat, but have concern about the ability to handle a vessel due to advancing age. The Significant Other prefers to sit (in AC comfort)and be entertained by parties of cruise line employees. Thanks again for the information.

Gordon Smith

Your discussion made no mention of the galleon, a vessel with either square-rigged Fore and Main masts and a shorter lateen-rigged Mizzen, or, on larger galleons, square-rigged Fore and Main masts, with a lateen-rigged Mizzen and a lateen-rigged Bonaventure mast, both shorter than either the Fore or Main masts. Also, it was not uncommon for a galleon to hoist a square-rigged bowsprit topsail in addition to the usual square-rigged spritsail.

Emma Delaney

As a hobbyist, I was hesitant to invest in expensive CAD software, but CADHOBBY IntelliCAD has proven to be a cost-effective alternative that delivers the same quality and performance.

https://www.cadhobby.com/

17 Sailboat Types Explained: How To Recognize Them

Birdseye view of beach and coastline with lots of small sailboats

Different Types of Sailing and Racing Explained

Italian sailboats with blue sails competing in sunny weather

How Are Sail Numbers Assigned? (And how to pick yours)

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

What is a Yawl Sailboat? (All You Need to Know)

Are you looking to discover the unique and captivating world of yawl sailboats? Or perhaps you’re an experienced sailor hoping to learn more about yawls? In this comprehensive guide, you’ll learn everything you need to know about yawl sailboats, from their fascinating history to the different types available and their common uses.

You’ll also learn the advantages of sailing a yawl, as well as the distinguishing characteristics that set them apart from other sailboats.

So, if you’re ready to learn about yawl sailboats, read on!

Table of Contents

Short Answer

A yawl sailboat is a two-masted sailing vessel with a mainmast that is taller than the mizzenmast, which is usually placed astern of the mainmast.

The sails on a yawl sailboat are usually a mainsail and mizzen sail, along with a jib or genoa.

Yawl sailboats are typically smaller than other types of sailboats, and they are often used for cruising and racing.

History of Yawl Sailboats

The yawl sailboat has a long and storied history, with its roots dating back to the 16th century.

During this time, yawl sailboats were often used for fishing and trading by coastal communities.

They were favored for their maneuverability and easy handling, which made them ideal for navigating shallow coastal waters.

By the 19th century, the yawl sailboat had become a popular choice for recreational sailors.

The vessel was known for its distinctive layout, which featured a mizzenmast located aft of the rudder post, and a mizzen sail that was smaller in size than the main sail.

This made the yawl sailboat quite easy to handle, even in strong winds.

By the early 20th century, the yawl sailboat had become a beloved vessel among recreational sailors, who prized its maneuverability and easy handling.

Although its popularity has waned in recent decades, the yawl sailboat is still appreciated by many sailors, who recognize its unique qualities and classic design.

Distinguishing Characteristics of Yawl Sailboats

A yawl sailboat is distinguished from other sailing vessels by its unique layout: the mizzenmast is situated aft of the rudder post, and the mizzen sail is typically smaller than the main sail. This particular design gives the vessel greater maneuverability, allowing it to turn quickly and tack more effectively than other sailboats. Additionally, the yawl sailboat has a broad beam, which helps keep the boat steady while providing ample room for crew and cargo.

The yawl sailboat is also known for its two masts, typically the mainmast and the mizzenmast.

The mainmast is typically the taller of the two and carries the majority of the sails weight and area.

The mizzenmast is typically shorter and carries a smaller sail.

This particular design helps balance the boat while sailing, allowing it to turn quickly and tack more effectively.

Another distinguishing characteristic of a yawl sailboat is its shallow draft.

This design allows the vessel to be used in shallow waters, such as harbors, estuaries, and shallow lakes, as well as in more open water.

The shallow draft also allows the boat to sail more easily in windy conditions, as the boat can more easily turn and tack in strong winds.

Finally, the yawl sailboat is known for its easy handling and maneuverability.

This makes it a favorite of recreational sailors, as it can be sailed with a small crew and is easy to handle and navigate.

Additionally, the yawl sailboat is well-suited for coastal cruising, as its shallow draft and maneuverability make it ideal for navigating narrow waterways and tight harbors.

Popularity of Yawl Sailboats

The Yawl sailboat has a long and storied history, dating back to the 16th century.

In the 19th and early 20th centuries, the yawl sailboat was particularly popular, with many sailors preferring this type of vessel for its easy handling and maneuverability.

The yawl sailboat was favored for its design and its ability to sail in both shallow and deep waters.

With its two masts, a mainmast and a mizzenmast, both carrying sails, and the mizzenmast being aft of the rudder post, the yawl sailboat was uniquely suited for sailing in shallow waters.

This design also allowed for the yawl sailboat to be highly maneuverable, allowing sailors to take advantage of the wind without having to change course.

The yawl sailboats smaller mizzen sail allowed for a greater degree of control when sailing in tight quarters.

Additionally, the yawl sailboat was favored for its ability to handle strong winds, making it an ideal vessel for sailing in both coastal and open sea waters.

The yawl sailboat was also favored for its speed.

With its design and two masts, it was able to sail faster than other vessels of its era.

As a result, the yawl sailboat became a popular choice for racing.

The yawl sailboat was also favored for its relatively low cost, when compared to other types of sailing vessels.

Today, the yawl sailboat is still a popular choice for sailors, both for racing and pleasure.

Though the design has changed over the years, with some boats having three masts and larger sails, the yawl sailboat remains a favorite among those who enjoy the open sea.

Advantages of Yawl Sailboats

The yawl sailboat has many advantages over other types of sailing vessels.

Firstly, its distinctive two-mast layout allows for a greater range of sail options, providing more flexibility in terms of sailing direction and speed.

With the mizzenmast placed aft of the rudder post, the yawl sailboat is more maneuverable, allowing it to make tighter turns and navigate shallow waters with ease.

Additionally, the size of the mizzen sail offers a greater range of sail options, allowing the sailor to adjust the sails depending on the conditions.

The yawl sailboat is also favored by sailors for its ease of handling.

With its two-mast layout, the yawl sailboat is easily controlled and requires less effort to maneuver than other types of sailing vessels.

This makes it ideal for sailing in coastal waters, where conditions can be unpredictable.

Furthermore, the yawl sailboat has a shallow draft, which allows it to navigate shallow waters and harbors with ease.

Finally, the yawl sailboat is an aesthetically pleasing vessel.

With its two masts, the yawl sailboat has a classic and timeless look.

Its distinctive profile makes it stand out among other types of sailing vessels, and its sails add a unique touch of elegance to the vessel.

This makes the yawl sailboat a popular choice among sailors who value aesthetics and style.

How to Sail a Yawl Sailboat

Sailing a yawl sailboat is not as difficult as it may seem.

To get started, youll need to familiarize yourself with the vessels layout and the type of sails it uses.

A yawl sailboat has two masts, a mainmast and a mizzenmast, both carrying sails.

The mizzenmast is aft of the rudder post and the mizzen sail is typically smaller in size than the main sail.

With a yawl sailboat, the mizzenmast is typically equipped with a boom and gaff, which are used to control the sail.

To sail a yawl sailboat, you will need to adjust the sails to catch the wind.

This requires knowledge of the points of sail, which are the various angles in which the wind is blowing in relation to the vessel.

Yawl sailboats are typically favored by sailors for their ease of handling and maneuverability.

As such, they are able to sail in a variety of conditions and angles.

When adjusting the sails, be sure to trim the sails in a way that is appropriate for the conditions.

In order to turn a yawl sailboat, you will need to adjust the sails and rudder to manipulate the wind.

To turn the boat to port, or left, you will need to tack the sails.

This involves turning the bow of the boat into the wind and adjusting the sails to catch the wind on the other side.

To turn the boat to starboard, or right, you will need to jibe the sails.

This involves turning the stern of the boat into the wind and adjusting the sails to catch the wind on the other side.

Once you have mastered the basics of sailing a yawl sailboat, you can begin to explore the many possibilities it offers.

Yawl sailboats are particularly well-suited for coastal voyages, as they are able to maneuver easily in tight spaces.

Many sailors also enjoy using yawl sailboats for racing, as they provide a unique challenge for experienced skippers.

With the right skills and knowledge, you can make the most of your yawl sailboat and explore new horizons.

Types of Yawl Sailboats

Yawl sailboats are a type of sailing vessel, traditionally with two masts, a mainmast and a mizzenmast, both carrying sails.

The mizzenmast is positioned aft of the rudder post, and the mizzen sail is typically smaller in size than the main sail.

Yawl sailboats have a long history, dating back to the 16th century, when they were first designed by Dutch and English ships.

They had their peak popularity in the 19th and early 20th centuries, as they were favored by sailors for their easy handling and maneuverability.

Yawl sailboats come in a variety of styles and sizes, from small dinghy-style vessels to large ocean-going yawls.

Smaller yawls are great for exploring coastal waters, while larger yawls are suitable for ocean voyages.

The traditional design of a yawl sailboat consists of two masts, a mainmast and a mizzenmast, both carrying sails.

The mizzenmast is positioned aft of the rudder post, while the mizzen sail is typically smaller in size than the main sail.

The main sail is typically triangular in shape, while the mizzen sail is typically rectangular in shape.

There are also variations on the traditional yawl sailboat design, such as schooners and ketches.

A schooner is a type of yawl sailboat with two or more masts, while a ketch is a type of yawl sailboat with two masts, with the mizzenmast further aft than the mainmast.

Yawl sailboats are favored by sailors for their easy handling and maneuverability.

They can navigate tight spaces and can turn on a dime, making them perfect for exploring coastal waters.

They are also great for short voyages, as they can be easily stored and transported.

Yawl sailboats are relatively affordable, making them accessible to a range of sailors.

Common Uses of Yawl Sailboats

Yawl sailboats have been used for centuries, and they remain popular today.

Traditionally, they have been used for fishing, cruising, and racing.

They are often used for short-distance coastal sailing, as they are easy to maneuver and have a shallow draft, allowing them to navigate shallow and narrow waterways.

Yawl sailboats are also favored by sailors for their stability and versatility.

With a larger mizzen sail and two independent sail plans, sailors can easily adjust the sails to suit their needs.

Yawl sailboats are also used for pleasure cruising, and they are often seen in marinas and sailing clubs.

With their classic design and easy-to-handle sails, yawl sailboats are a great choice for sailors of all skill levels.

Final Thoughts

It is clear that the yawl sailboat has a long and distinguished history, with its distinctive layout and easy handling making it a popular choice for sailors.

With its versatility, easy maneuverability, and wide range of uses, the yawl sailboat is an ideal vessel for coastal sailing.

If you are looking to experience the joys of sailing, a yawl sailboat is a great option to consider.

So if you’re interested in giving sailing a go, why not start with a yawl sailboat?

James Frami

At the age of 15, he and four other friends from his neighborhood constructed their first boat. He has been sailing for almost 30 years and has a wealth of knowledge that he wants to share with others.

‍ General Description of a Ketch Sailboat

A ketch is a two-masted sailboat with a tall mizzenmast mast aft of the mainmast. A key characteristic of Ketch sailboats is that their mizzenmast is shorter than the mainmast.

The mainmast itself is typical and resembles a sloop mast. A ketch has a mainsail and one or more headsails on the mainmast, along with a single mizzen on the mizzenmast.

A ketch can easily be mistaken for a yawl, as these vessels have similar sail arrangements. Ketch sailboats can have square or triangular rigs, depending on the age and specific design of the boat.

A gaff headsail is usually accompanied by a triangular mizzen on a ketch, similar to a schooner.

Ketch Sailboat History

The ketch is a relatively old part of the sailing world. Based on the classic yawl design, the ketch was used extensively for workboats on the New England coast at the height of the sailing era.

Ketch sailboats were robust and easy to handle. They also tracked a naturally straight course due to their mizzen, which was used as a primitive form of self-steering. This was helpful for small fishing boats, as the crew didn’t need to attend to the rudder quite so often.

Ketch sailboats continued working the New England coast well into the era of steam. In the mid to late-1800s, ketch-rigged workboats were still a common sight in coastal areas.

Today, they persist as recreational and cruising sailboats, as their tough and stable rigs are still a practical option for boatbuilders.

Types of Ketch Sailboats

There are many types of ketch sailboats on the water. The ketch is not the most common kind of sailboat, but there are enough of them around to notice once in a while. Ketch sailboats were once utility boats, but they’ve been strictly used for recreational and cruising boats for the last 100 years or so.

The most common kind of ketch is the simple cruising ketch. These sailboats are typically made of fiberglass and resemble other cruising sailboats in almost every way.

Their interior accommodations are the same as a comparably-sized sloop, though cockpit space is limited due to the presence of a mizzenmast and rigging.

The ketch rig is a popular choice for motorsailers, especially heavy-displacement versions. The ketch is a stable design with quite a bit of power due to its additional mast, which allows the mainsail and boom footprint to be slightly smaller. The ketch is also highly controllable, which is great for closed-cockpit sailboats.

The ketch rig is also popular on classic sailboats. Specifically, the gaff-rigged ketch is a common sight in some classic boat circles—particularly on the East Coast of the United States. Wooden ketch-rigged boats were outfitted with both traditional square and modern triangular rigs.

There are a few smaller open-cockpit ketch sailboats around, and these are popular for cruising deeper water—but not far from shore. Open cruising ketch sailboats are usually less than 20 feet long and can be found most often around Chesapeake Bay.

Cutter Ketch Rig

A cutter ketch is simply a ketch rig with additional headsails. Because the mast is in the same position as a sloop, the ketch is easy to rig with additional forward sails. A typical cruising ketch can use a wide variety of headsails, including a spinnaker.

Ketch Vs Yawl

The ketch rig is very similar to the yawl, which also has a tall mainmast and an additional mizzenmast and mizzen aft. The yawl is a much older boat that originated in England or Scotland around the 17th century.

The yawl rig usually has a shorter mizzenmast that’s positioned further aft, as the mizzen boom usually extends beyond the stern of the boat. A ketch mizzen is positioned forward, usually a bit larger and more comparable to the size of the mainsail.

Yawl and ketch rigs are both quite stable. A ketch usually has a bit more power due to its larger mizzen, though the yawl is generally considered to be easier for a single person or a short-handed crew to handle.

Ketch Rig Benefits

There are numerous benefits to the ketch rig, especially when compared to tall Marconi/Bermuda rigs. The primary benefit is that, despite the additional mast and rigging, a ketch is exceptionally easy to handle.

A ketch spreads out its sail area between the headsail, mainsail, and mizzen. The additional mast and sail allow the mainmast to be shortened, which naturally makes the boat easier to control single-handed.

Ketch rigs offer additional precision, as you can adjust three sails independently to optimize performance for any given wind condition. The mizzen is in close proximity to the cockpit, and due to its small size, it’s easy to control.

Ketch rigs can also self-steer to some extent. The mizzen works the same way that a stabilizing sail on a fishing drift boat does and keeps the boat tracking on a straight course with or without constant rudder input from the crew.

The ketch rig also offers a level of redundancy that traditional single-masted sailboats don’t have. This is particularly attractive to long-range cruisers. A ketch has a shorter mainmast, which allows boatbuilders to use stronger materials and maintain the same weight.

A ketch can continue sailing if you lose a mainstay or suffer dismasting, as there’s an additional mast aft that probably won’t also go down. This extra level of safety is useful when conditions are rough, and it also gives you peace of mind when out on the open ocean.

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

Best Electric Outboard Motors | Life of Sailing

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands | Life of Sailing

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

History and Evolution: From Ancient Origins to Technological Advancements

The lineage of two-masted sailboats stretches back to ancient maritime civilizations, where the imperative of ocean exploration spurred the development of advanced sailing technologies. These early innovations laid the groundwork for the evolution of sailboats, which adapted over the centuries to meet the changing demands of navigation, trade, and warfare. The design and functionality of two-masted sailboats have been refined through technological advancements, making them as much a symbol of historical progress as they are of nautical tradition.

Design and Features: Anatomy and Types of Two-Masted Sailboats

Understanding the design of a two-masted sailboat is key to appreciating its capabilities. The complex arrangement of hull, masts, sails, rigging, and keel is essential for the boat's performance at sea. These components work in harmony to harness the power of the wind, enabling the vessel to navigate with precision and grace. The variety within this category, including schooners, ketches, yawls, and brigs, highlights the adaptability of two-masted sailboats to different sailing needs, from leisurely coastal cruising to high-stakes ocean racing.

Read our top notch articles on topics such as sailing, sailing tips and destinations in our Magazine .

Check out our latest sailing content:

Fishing and sailing: where to sail for the best catches, skippered boats: how to pack for a cruise, boat rental with skipper: everyone can go to sea, skippered boats: myths about sailing, sail from lefkada for 14 days. where to, what not to miss when visiting lefkada, skippered boats: step by step boat rental, where and why to sail from lefkas marina, don’t panic: handling maritime emergencies, skippered boats: which boat to choose, the best sailing routes from biograd na moru, yachting away from ourselves: a voyage to inner peace, sail to the 7 most beautiful sights in greece, skippered boats: how to build a crew, skippered boats: the most popular cruise destinations, what skipper's licence do i need, skippered boats: what else to experience on a cruise, from lefkada or corfu to paxos and antipaxos, discover the paradise of paxos and antipaxoss, skippered boats: a typical day on a boat, skippered boats: what it looks like on a boat, discover corfu: sailing adventure in the ionian, sextant and navigation: survival without gps, 5 best sailing routes in the bahamas, skippered boats: how much does a boat holiday cost, yachting guide to the bahamas, the ultimate yacht cleaning kit, introduction to chartering with a skipper, traditional sailor tattoos: meaning of the swallow, the most popular catamarans of 2023.

Silhouette of a two-masted schooner against a beautiful sunset with the sun on the horizon.

Two-Masted Sailboats in Use Today: Recreational and Competitive Sailing

Today, two-masted sailboats flourish in both recreational and competitive arenas. For leisure sailors, these vessels offer a unique combination of challenge and tranquility, allowing for intimate experiences with the sea. The versatility of two-masted sailboats makes them ideal for a range of activities, from day sailing to extended voyages. In the competitive realm, these sailboats demonstrate their enduring relevance and performance, participating in regattas and races that test the skill and strategy of their crews.

Maintenance and Upkeep: Ensuring Longevity and Performance

The beauty and functionality of two-masted sailboats are preserved through meticulous maintenance and thoughtful care. Routine inspections and maintenance tasks are crucial for keeping these vessels seaworthy, highlighting the importance of attention to detail in preserving their condition. Beyond the immediate upkeep, long-term care strategies are essential for ensuring that these iconic vessels continue to grace the world's waterways, serving as living links to the rich maritime heritage they embody.

Famous Two-Masted Ships: Icons of the Seas

Throughout history, several two-masted ships have etched their names into the annals of nautical lore, becoming icons of exploration, power, and adventure. Ships like the HMS Beagle, renowned for carrying Charles Darwin on his epic voyage that contributed to the development of evolutionary theory, and the schooner Bluenose, a racing legend and fishing vessel that symbolized Canadian grit and maritime prowess, are prime examples. These famous ships not only highlight the critical role of two-masted vessels in exploration and competition but also celebrate their timeless beauty and enduring spirit.

In essence, two-masted sailboats encapsulate the spirit of sailing, merging the allure of history with the thrill of modern-day navigation. They stand as a testament to human creativity and the ceaseless quest for harmony with the elements, inviting each new generation of sailors to partake in a journey that transcends time and tides.

So what are you waiting for? Take a look at our range of charter boats and head to some of our favourite sailing destinations.

Interested in exploring the world of two-masted sailing ships? Contact me to book your yacht experience today!

Denisa Nguyenová

Understanding the Two-Masted Sailboat

By Matt Claiborne

Two-Masted Boats with Fore-and-Aft Rigged Sails

A ketch is a two-masted sailboat. The rear mast, called the mizzen mast, is shorter than the forward main mast. The mizzen mast is mounted forward of the rudder post.

A yawl is similar to a ketch, but the rear mizzen mast is moved farther aft, behind the rudder post. This makes the mizzen on a yawl seem like an afterthought, almost like it’s attached to the railing.

If a two mast boat has masts of equal height or the forward mast is the shorter of the two, it is a schooner. They can have as many masts as the design called for.

Benefits of Two Masted Sailboats

Easy to balance steering forces

More sail plan options for heavy winds

Lower sheet loads mean smaller and less expensive

Lighter loads on smaller sails for easier handling

Shorter overall mast height for bridge clearance

Mizzen can be used as a riding sail at anchor

2 Masted Ship Examples with Square Rigged Sails

A brig is a double mast sailboat with both masts square rigged. In addition, it has fore-and-aft staysails and jibs and a mizzen sail on the aft mast–which is usually gaff-rigged.

A brigantine is a ship with two masts, with the foremast square-rigged and the aft mainmast fore-and-aft rigged.

The Two-Masted Sailboat

Boat maintenance.

Boat Reviews

Boats Specs
Marine Pros
Boat Insurance
Boat Warranties
Boat Transport
Boat Towing
Marine Forecasts

Your Ultimate Boating Resource

What is a two-mast sailboat called?

A two-mast sailboat is typically known as a schooner. These vessels are popular among sailors due to their unique design and efficient sailing capabilities.

A schooner consists of two masts, with the foremast being shorter than the mainmast. This design allows the vessel to have a larger sail area and creates a better balance for sailing in different wind conditions.

The history of schooners can be traced back to the 18th and 19th centuries, where they were commonly used as merchant vessels for transporting goods along coastal routes. These vessels were famed for their speed and maneuverability, allowing sailors to navigate through shallow waters and tight channels with ease.

Today, schooners are mainly used for recreational purposes and can be found in a variety of sizes and designs. Some feature luxurious amenities such as cabins, kitchens, and entertainment systems, while others are smaller, more traditional vessels designed for racing or day sailing.

Schooners are also popular among boating enthusiasts due to their classic and timeless appearance. They are often featured in movies, novels, and art, and have become synonymous with the sea-faring lifestyle.

If you are considering purchasing or renting a schooner, it is essential to have a basic understanding of sailing techniques and safety precautions. Proper maintenance and care are also crucial to keep your vessel in top condition, ensuring a safe and enjoyable sailing experience for you and your crew.

A two-mast sailboat is known as a schooner, and these vessels remain a popular choice among sailors and boating enthusiasts worldwide. Whether you are looking to explore new coastal regions, indulge in luxury sailing holidays, or simply enjoy a day out on the water, a schooner offers an excellent opportunity to experience the thrill and adventure of sailing.

De-Winterize Your Boat the Right Way with These Professional Tips

10 essential tips for fishing near private property, the benefits of using a drift sock: guidance for anglers, lure fishing: secrets for imitating live bait and attracting fish, explore the untapped depths of america’s best bass fishing spots, tackle your catch-and-release adventures with these 6 tips, outboard motor maintenance: tips for keeping your engine in top shape, the essential boat tool kit: tools every boater needs, diy boat building: 8 tips and tricks for building your own vessel, the art of miniature maritime craftsmanship: ship in a bottle, antifouling paints: a guide to keeping your boat shipshape, beginner’s guide to standup paddle boarding: tips and techniques, boating for fitness: how to stay active on the water, kayak safety: how to stay safe on the water, anchoring in a kayak or canoe: how to secure your small boat, 2024 aquila 47 molokai review, 2024 sea-doo switch 13 sport review, 2024 aspen c120 review, 2024 yamaha 222xd review, 2024 sailfish 316 dc review, 2023 seavee 340z review, 2023 centurion fi23 review, gear reviews, megabass oneten max lbo jerkbait review, fortress anchors fx-7 anchoring system review, fortress anchors fx-11 anchoring system review, fortress anchors commando anchor kit review, fortress anchors aluminum anchors review, stay in touch.

To be updated with all the latest news, offers and special announcements.

Types of Sailboats
Parts of a Sailboat
Cruising Boats
Small Sailboats
Design Basics
Sailboats under 30'
Sailboats 30'-35
Sailboats 35'-40'
Sailboats 40'-45'
Sailboats 45'-50'
Sailboats 50'-55'
Sailboats over 55'
Masts & Spars
Knots, Bends & Hitches
The 12v Energy Equation
Electronics & Instrumentation
Build Your Own Boat
Buying a Used Boat
Choosing Accessories
Living on a Boat
Cruising Offshore
Sailing in the Caribbean
Anchoring Skills
Sailing Authors & Their Writings
Mary's Journal
Nautical Terms
Cruising Sailboats for Sale
List your Boat for Sale Here!
Used Sailing Equipment for Sale
Sell Your Unwanted Gear
Sailing eBooks: Download them here!
Your Sailboats
Your Sailing Stories
Your Fishing Stories
Advertising
What's New?
Chartering a Sailboat

The Different Types of Sailboats

If you’re a sailboat fanatic like me, all types of sailboats will attract your attention. Some more so than others admittedly, but all will have something about them that catches your eye.

If you’re not a fanatic (not yet, that is) but just an interested observer, then the first thing you’ll notice about a sailboat will be how many masts it has and the configuration of its sails - in other words, its 'rig'.

This observation alone will enable you to identify the five main types of sailboats — sloops, cutters, ketches, yawls and schooners - all of which are described here.

But apart from the various rig types, you can describe types of sailboats from a different viewpoint - sailing dinghies, dayboats, motorsailors, monohulls, catamarans and trimarans.

Let's make a start with the various rig types...

A single-masted sailboat with just two sails — a foresail (aka headsail or jib) and a mainsail — is a sloop, the purest type of sailboat.

The sloop rig can also be described as a Bermuda rig, Bermudian rig or Marconi rig.

Examples of Sloops

If a sloop has an additional sail between the headsail and the mainsail, then it's no longer a sloop - it's a cutter.

Some cutters - like the one shown here - have the foresail set forward on a bowsprit, with the inner forestay permanently rigged to the stemhead where the foresail otherwise would be, or to a central chainplate further aft on the foredeck.

Examples of Cutters

The following boats may look like cutters with their double headsails, but they're not cutters at all...

Trintilla 44 cruising yacht with solent rig

To find out why, click here...

A ketch is a two-masted sailboat, a main mast forward and a shorter mizzen mast aft.

But not all two-masted sailboats are ketches — they might be yawls (see below).

A ketch may also sport a staysail, with or without a bowsprit, in which case it would be known as a cutter-rigged or staysail ketch.

Examples of Ketches

Note that the Ocean 71 and the Irwin 52 are cutter-rigged, and are traditionally referred to as Staysail Ketches .

Cat Ketches

Cat-ketches are recognised by the lack of any standing rigging to support their pair of unstayed masts.

And yes, if the after mast is taller than the foremast then it's called a cat- schooner sailboat.

Examples of the Various Types of Sailboats...

Other Types of Sailboats

The seven sailboat rig variations shown here are the most popular types of modern cruising boat rigs, but there are other rig versions which were once found on commercial, fishing, and naval sailing vessels.

They include:

Full square-rigged sailing vessels
Barkentines
Brigantines

And you can see examples of them here ...

In this article I've said that ketches, yawls and schooners with two headsails can be called cutter rigged. This is a commonly used description but strictly speaking, there's only one rig that can accurately be called a cutter - and that's a single-masted sailboat with two headsails. My thanks to 'Old Salt' for drawing my attention to this!

Recent Articles

Hallberg Rassy 42e for Sale

May 23, 24 03:01 AM

Westerly Oceanranger Specs & Data

May 20, 24 03:34 AM

Westerly Oceanranger 38 for sale

May 19, 24 04:09 AM

Here's where to:

Find Used Sailboats for Sale...
Find Used Sailing Gear for Sale...
List your Sailboat for Sale...
List your Used Sailing Gear...

Our eBooks...

A few of our Most Popular Pages...

Types of Sailboats by Type of Rig

16 December 2015

To have a better idea of which types of sailboats would best suit your needs, your Allied Yachting broker can advise you on the various options available on the market for new or second-hand vessels as well as new construction. In the meantime, here is a summarized guide to the different categories of sailing yachts by type of rig , whether they are monohull (single hull) or multihull , as they’re called in the Mediterranean.

Sailboats by rig type: hulls, masts

Single masted sailboat with monohull

The most common monohull modern sailing yacht is the sloop, which features one mast and two sails, thus sloops are single-masted sailboats. If they have just two sails — a foresail and a headsail — then they’re a Bermudan sloop, the purest type of sailboat. This simple configuration is very efficient for sailing into the wind.

Sailing sloops with moderate rigs are probably the most popular of all cruising sailboats. Just a single-masted sailboat with two sails (a foresail or headsail, and a mainsail) and the minimum of rigging and sail control lines they are relatively simple to operate and less expensive than rigs with multiple masts.

Sloops are adapted for cruising as well as racing, depending on the height and size of their rig.

The cutter sailing yacht is also a monohull similar to a sloop with a single mast and mainsail but generally carries the mast further aft to allow for a jib and staysail to be attached to the head stay and inner forestay, respectively. Once a common racing configuration, today it gives versatility to cruising boats, especially in allowing a small staysail to be flown from the inner stay in high winds.

Thus, a cutter-rig sailboat has an additional sail (the staysail) set on its own stay between the foresail and the headsail.

Cutters are mostly adapted for cruising, but capable of good performance while racing as well.

A ketch is a two-masted sailboat, the main-mast forward and a shorter mizzen mast aft.

But not all two-masted sailboats are ketches — they might be yawls.

A ketch may also carry a staysail, with or without a bowsprit, in which case it would be known as a cutter-rigged ketch.

Ketches are also monohulls, but there is a second shorter mast astern of the mainmast, but forward of the rudder post. The second sailboat mast is called the mizzen mast and its sail is called the mizzen sail.

Yawls have their origins as old-time sail fishing boats, where the small mizzen sail was trimmed to keep the vessel steady when hauling the nets.

Similar to a ketch, the difference being that the yawl has the mizzen mast positioned aft of the rudder post whereas the ketch has its mizzen mast ahead of the rudder post.

Thus, a yawl is also a monohull, similar to a ketch, with a shorter mizzen mast carried astern the rudderpost more for balancing the helm than propulsion.

Schooners are generally the largest monohull sailing yachts.

Monohull two masts sailing boat

A schooner has a mainmast taller than its foremast, distinguishing it from a ketch or a yawl. A schooner can have more than two masts, with the foremast always lower than the foremost main. Traditional topsail schooners have topmasts allowing triangular topsails sails to be flown above their gaff sails; many modern schooners are Bermuda rigged.

A schooner is a two-(or more) masted sailboat, in which the aft-most mast – the mainmast – is the same height or taller than the foremast. Many sailors agree that of all the different types of sailboats, a schooner under full sail is one of the most beautiful sights afloat.

Gaffed-rigged sailboats, or “gaffers”, have their mainsail supported by a spar – the “gaff” – which is hauled up the mast by a separate halyard. Often these types of sailboats are rigged with a topsail. The gaff rig is no longer seen on modern production yachts.

A catamaran (‘cat’ for short) is a multihull yacht consisting of two parallel hulls of equal size.

A catamaran is geometry-stabilized, that is, it derives its stability from its wide beam, rather than having a ballasted keel like a monohull. Being ballast-free and lighter than a monohull, a catamaran can have a very shallow draught. The two hulls will be much finer than a monohull’s, allowing reduced drag and faster speeds in some conditions, although the high wetted surface area is detrimental in lower wind speeds, but allows much more accommodations, living and entertaining space in stability and comfort.

Two parallel hulls sailing catamaran

The speed and stability of these catamarans have made them a popular pleasure craft in Europe, most high-quality catamarans are built in France, but careful since their wide beams aren’t easy (or cheap) to berth in the French Riviera.

Racing catamarans technology has made them today’s leading racing sailboats of the world, like in the latest editions of America’s cup or other renowned transoceanic races.

Please surf through our website listings of sailing catamarans .

OTHER MULTIHULLS

Even harder to berth in the Mediterranean, and most commonly designed for around-the-globe racing rather than cruising, the trimarans have also been gaining some popularity in the western hemisphere, especially by naval designers with futuristic projects.

A trimaran is a multihull boat that comprises a main hull and two smaller outrigger hulls (or ‘floats’) which are attached to the main hull with lateral beams.

MOTORSAILER

A motorsailer or “motorsailor”, is a type of sailing vessel, typically a pleasure yacht, that derives propulsion from its sails and engine(s) in equal measure.

While the sailing yacht appeals primarily to the purist sailing enthusiast, the motorsailer is more suited for long-distance cruising, as a home for ‘live-aboard’ yachtsmen. The special features of the motorsailer (large engine, smaller sails, etc.) mean that, while it may not be the fastest boat under sail, the vessel is easily handled by a small crew. As such, it can be ideal for retired people who might not be entirely physically able to handle large sail areas. In heavy weather, the motorsailer’s large engine allows it to punch into a headwind when necessary to make landfall, without endless tacking to windward.

The Turkish word gulet is a loanword from the French goélette, meaning ‘schooner’.

A gulet is a traditional design of a two-masted (more common) or even three-masted wooden sailing vessel from the southwestern coast of Turkey, particularly built in the coastal towns of Bodrum and Marmaris; although similar vessels can be found all around the eastern Mediterranean. For considerations of crew economy, Diesel power is commonly used on these vessels, similar to a motorsailer. Today, this type of vessel, varying in size from 14 to 45 meters, is very popular and affordable for tourist charters in Turkey, the Aegean, Greece and up to Croatia in the Adriatic.

Please surf through our website listings of cruising sailing yachts by type of rig.

OUR YACHT LISTINGS:

New Yachts for Sale
Pre-owned Yachts for Sale
Yachts for Charter

Yachting Consultants

Sale-Charter-Brokerage-Management

Headquarters:

34 Rue Caffarelli 06000 Nice, France

Front Office:

Boulevard de La Croisette – Port Canto 06400 Cannes, France

T.: +33 493 43 82 83 Email: [email protected] Website: www.alliedyachting.com

Two-Mast Sailboat Types

Numerous sailors have a soft spot for two-mast sailboats, and there really is something unique in two-mast sails, irrespective of whether you are a sailboat enthusiast or just an intrigued passerby.

The two masts are typically the first feature you observe on such a sailboat. The mainmast, or foremast will usually be larger than the rear mast, also known as the mizzenmast.

But aside from being elegant and impressive, a two-mast sailboat provides perfect balance, which can be best obtained by making adjustments to the masts in a variety of ways.

The mizzenmast acts as that shoulder you can rely on as it assists with the sailboat’s stability while it is moving, and it can also function as a propulsion system in certain situations.

So, let’s take a look below at various kinds of two-mast sailboats and their advantages!

What Do You Call A Sailboat With Two Masts?

Several sailboats have two masts (see also ‘ Sailboat Mast: Everything You Need To Know ‘), the four most popular of which we will explore in a bit. In these sailboats, the styles of their masts differ in most instances, but the basic concept stays the same.

All these sailboats come with an extra mast at the rear or the front of the foremast. If that supplemental mast is in front of the foremast, it is called a foremast; if it is behind it, it is called a mizzenmast.

Among the most popular two-mast sailing vessels is the yawl. It is equipped with a mizzenmast and a foremast. Typically, the mizzenmast will be relatively short, particularly when compared to the foremast.

This renders it an angled sailboat, seeing that the foremast is situated at the front of the boat and the mizzenmast is situated at the back. A yawl’s mizzenmast is situated toward the back of the boat steering mechanism and is primarily used to boost helm stability.

It’s very easy to mix up a yawl and a ketch, so it’s best to clear that up before proceeding. They both are two-mast sailboats, with the foremast at the front and the mizzenmast behind it.

The spot of the mast is what distinguishes a ketch from a yawl. The mizzenmast is placed behind the boat steering mechanism post in a yawl and in front of it in a ketch.

A ketch’s mizzenmast is approximately the same height as the foremast, and it is employed to hold the mainsail. Its primary purpose, though, is to propel the boat as well as sail it adequately, especially in stronger wind.

That very function contrasts with a yawl’s mizzenmast, which is only utilized to help with balancing the steering wheel and cannot propel the boat forward.

This indicates that a ketch’s mizzenmast is larger than a yawl’s mizzenmast. In summary, a ketch’s mizzenmast is a moving sail, whereas a yawl’s mizzenmast serves as a balancing one.

In downwind or wind gusts, a ketch is at a favorable position when compared to a sloop. This is due to the fact that it has more setup options than a standard sloop.

The rear mast allows the sailor to adjust in strong winds and choose the most appropriate percentage of canvas to move with.

Provided that the mizzenmast is typically in an ideal position, it may also aid in the stabilization of the sailboat under force.

Essentially, a ketch comes with numerous practical advantages that make it ideal for most scenarios on the water.

A ketch, other than cruising serenely on a beam reach, is completely controllable and can provide a wide range of possibilities in a variety of weather circumstances and situations.

A schooner can even have three masts, but the one with two typically has a fairly small mainmast and a bigger mizzenmast, which in essence becomes the mainmast.

As a result, the main feature of a schooner is that its masts are both tall and with little to no difference, with the rear mast, in some cases, being a bit taller.

A schooner is slower than a sloop, despite being simpler to navigate. That is why so many seafarers choose to sail with a sloop than with a schooner, although it’s still an impressive sight, and even more so when fully sailing.

Even though schooners with square-shaped sail is what most people often get, several other schooners available are equipped with diagonal sprit rigs.

Schooners that have spritsails are unsuitable for large sea routes as, when the sprit rig gets lowered, it becomes impossible to manage. The sprit rig, on the contrary, is perfect in coastal areas because the topsail can hold a high gust of wind.

The brig, same as all the previously mentioned sailing ships, is a two-mast sailboat, with the foremast being of a square shape.

The foremast may come in the shape of a square, part square, or triangle in design. The foremast of certain brigs has a lateen mainsail (see also ‘ The Definition And History Of The Lateen (Triangular) Sail ‘).

These sailboats have been heretofore employed by pirates and launched by oars. Its name originates from the Italian term “brigantine,” which roughly translates to “pirate.” Before becoming sailboats, such kinds of sailboats were employed by pirates in the 1500s.

The two most prevalent brig varieties are:

Brigantine – The main mast is triangular, while the front mast is partly squared.
Hermaphrodite brig – This brig is equipped with two slightly squared masts, with the mainmast being gaff-rigged and topsail, something that makes it a half schooner. That is why it is also referred to as the schooner brig or the half brig.

Brigs are simple to operate and navigate in terms of speed and drivability, which may be why pirates favored them, and they are usually bigger than the rest of the two-mast or single-mast sailboats.

The Benefits Of A Two-Masted Sailboat

But why might someone prefer a two-masted sailboat more than a single-masted one?

At first glance, perhaps it will look like a one-masted sloop is easier to control. However, having more masts and a wider range of sails to pick from has its benefits.

A Two-Masted Sailboat Has Greater Sail Area Division

When a sail area is split over a larger number of sails, the area for every sail becomes smaller and easier to navigate.

This is especially useful when moving with fewer passengers on board and in strong weather conditions.

A Two-Masted Sailboat Provides More Rough Weather Choices

If a cruiser encounters higher-than-expected winds, having more sails, and thus more alternatives, can be extremely beneficial.

Most ketch-rigged boats, for instance, can rest nicely in rising winds and waves with only the mizzen being used to hold the boat’s bow facing up into the wind, a practice called “heaving to.”

This tends to mean that the staff does not have to be on deck and can remain safely hidden below since the sail works on its own.

A Two-Masted Sailboat Provides More Sail Balance

Seafarers must be knowledgeable of sail balance if they want to maneuver a boat proficiently.

This entails ensuring that the sails are drawn in such a way that the sailboat can float in a horizontal line without having to utilize the rudder excessively in order to right the route.

A Two-Masted Sailboat Allows For Engine-Free Sailing

If you want the enjoyment of cruising without relying on an engine, or if your engine won’t work, knowing that you have a mizzen sail could be extremely advantageous.

The mizzen can be employed to float smoothly and in perfect control when trying to catch or deciding to leave a mooring ball.

The same is true for anchoring while sailing. This is definitely not an uncommon case scenario; we have all had to do something similar at least once in our lives.

A Two-Masted Sailboat Provides An Anchor Riding Sail

Even as you are sailing across the globe, you will inevitably come across an anchorage that is just not perfectly easy and serene.

The smallest wave that can create some kind of shuddering can make people onboard feel nervous and become dissatisfied with their sailing experience.

A two-mast sailboat will be in an advantageous position in this situation as the mizzen can be lifted and fastened in firmly to counteract the boat’s side-to-side moving.

It may also be counterbalanced by attempting to make use of the wind to direct the boat’s bow into the waves, resulting in a way steadier sailboat and a satisfied crew.

A Two-Masted Sailboat Is Nearly Impossible To Be Completely Dismasted

A two-masted sailboat has an extra benefit: the mizzen, while too small to push the sailboat at high speeds, can most likely get you back safe in case the mainmast breaks or is torn apart in extreme situations.

The Bottom Line

There are dozens of reasons why seafarers chant paeans to these sailboats. Even in windy conditions, you can break down the mainmast and employ the mizzen mast to provide a more aligned and pleasant voyage.

There are different kinds of two-mast sailboats, thus there is no single term that can fit them all.

The only thing that can group them is their two-mast feature, so if you decide to sail in one of them, it is up to your preference to choose which one will take you on your next adventure!

The 15 Different Types Of Sailing Ships

The 15 types of sailing ships are listed below.

The Schooner
The Carrack
The Brigantine
The Barquentine
The Clipper
The Windjammer
The Fully Rigged Ship

Throughout centuries, there have been many different types of sailing ships seen from harbors and coastlines around the world.

This article will show the various types of sailing vessels that have made their mark in maritime history and we showcase their purposes and why they are still remarkable feats of marine engineering.

The different sizes, shapes, and masts of the ships required different numbers of sailors to handle them and each type of ship was crafted with a different purpose in mind.

All ships are unique with no two types of ships being the same with each coming with its own experiences, features and requirements.

1. The Schooner

The Schooner sailing vessel, with an average size of 46m (152 feet) in length, was developed in the early 17th century and first used by the Dutch.

The ship came with fore and aft sails and they were created to operate in the toughest of wind and ocean conditions.

The Schooner was a multi-purpose sailing vessel used for transporting slaves to transporting cargo and it was used for fishing and racing too.

There are 5 different schooner types that are characterized by their rig configurations listed below.

Tern schooner : This was a 3-masted schooner most popular between 1880 and 1920 capable of carrying up to 400 tons in cargo and it required a crew of 6-8 people
4-6 masts schooner : These schooners spread the sail area over smaller sails
Grand Bank Fishing schooner : Similar to the famous Bluenose, it carries the main gaff topsail and a fisherman's staysail set between the masts.
Square Topsail schooner : This was a combination of fore and aft sails and small square sails, most popularly used for coastal cargo transportation in the 1800s
Coastal schooner : This was a coastal schooner sailing ship used for carrying goods and general cargo to nearby islands along the coast ( 1 )

The 19th Century schooner came with two or three masts, the one at the fore being shorter than the others.

Modern schooners, with Bermuda rigged sails, remain powerful, economical coastal liners traversing the Pacific.

Famous schooner sailing ships are listed below.

America : The Schooner named " America " was designed for racing and it became the first winner of the America's Cup international sailing trophy ( 2 )
Thomas W Lawson : The schooner “ Thomas W Lawson ” had a unique seven masts, with interchangeable sails and gear
Wawona : The schooner " Wawona " was one of the largest lumber carriers and fishing vessels between 1897 and 1947

2. The Carrack

The Carrack, developed in the 14th and 15th centuries with the first built in Portugal, is a nautically-rigged wooden ship with three or four masts each having square sails or triangular sails and it was heavily used between the 14th to 15th Centuries and remained popular until the 18th Century. It is the sailing ship Christopher Columbus used to sail the world.

It was the largest ship in Europe with the Spanish Carrack being more than 1,000 tons in weight and 150 feet (45 meters) in length. More modern versions of the Carrack were developed by the Portuguese and they could hold up to 2,000 tons. ( 3 ).

The Carrack had 4 decks with the lower 2 used for cargo, the 3rd was for accommodation and the 4th was for cargo owned by the crew ( 4 ) and this bulky ship was the standard trading ship along the Baltic, Mediterranean, Asian, and Atlantic coasts in the mid-16th century useful for carrying cargo across seas.

The Carrack had a strange shape which made it cumbersome to sail close to the wind and after a lot of engineering experiments, parts of the ship were stripped off giving the ship a high stern and a low bow.

The modern Carrack features a square-rigged mainmast, foremast, and a latten-rigged Mizzen mast, along with a rounded stern, sizable bowsprit, forecastle, and aft castle.

This is a large ship, built to carry heavy freight for long-distance hauls since it was very steady even in the worst weather with the British Army calling it the “Great Ship” because of its highly-functional ship design.

Famous carrack shipping vessels are listed below.

Santa Maria : This was the famous ship that Christopher Columbus used to sail and discover America in 1492
Victoria : The first ship to circumnavigate the globe
Grace Dieu : This was commissioned by King Henry V and it was one of the largest carrack ships in the world in 1418
Cinco Chagas : This was presumed to be the richest ship at that time. it was sunk in battle in 1594 ( 5 )

3. The Brigantine

A Brigantine is a two-masted sailing ship with the main mast both a fore-and-aft main sail, a triangular type of sail and a square main topsail that came in various sizes ranging from 30 tons to 150 tons and it could carry a crew of up to 125 people but the shipping vessel could still be handled by a smaller crew if needed.

These ships were similar to the sailing vessel called the Brig as they both had top-gallant sails and were used by the Royal Navy to scout and monitor enemies on the high seas while also being popular amongst pirates as they were faster and easily maneuverable sailing vessels.

It is unclear when the ship was originally built with loose definitions date the ship back to the 13th century when it was originally referred to as the "sail and oar-driven war vessel" ( 6 ) and early academic definitions where the vessel was referred to as the "Brigantine" was first seen in books in the early to mid-16th century ( 7 ).

They would sail across the trade routes of the Baltics and Northern Europe, all the way from Germany to Scandinavia.

The mid-size ships had two sails on the-mainmast with a stripped-down fully-squared rig.

4. The Barquentine

The Barquentine, first built in the 17th century and also referred to as a " schooner barque ", " barkentine " or " schooner bark ", is a sailing ship similar to a barque but with only the foremast square-rigged and the remaining masts rigged fore and aft ( 9 ). They weighed 250 to 500 tons.

The Barquentine has three or more masts and square sails on the fore and aft masts with the main mast had topmast and gaff sails and these had been stripped down to facilitate operation by a slimmer crew and basic rig.

The Barquentine sailed the waters of Northern Europe which were dominated by variable wind speeds and they were popularly used to carry lumber from Scandinavia and Germany to England and the Baltic Areas.

5. The Xebec

The Xebec, also known as " Zebec ", a name derived from the Arabic word for "Small Ship", was a sailing ship built in the 16th to mid-19th century that was used mainly for moving cargo.

The Xebec sailing vessel held between 90 and 400 crew and was 103ft 9 inches in length with a tonnage of between 200 - 300 tons ( 10 ) and they were very agile and popular with European navies.

The features of the Xebec are listed below.

Long-prow bulkheads
Narrow elongated hulls
Huge lateen yards
One aft-set mizzen mast
3 lateen-pillared masts, both raked forward and having a single triangular sail

Their shallow draft and lateen rig allowed for a closer pinch to the wind allowing them to flee quickly or turn around and fire a broadside volley quickly.

After a lot of engineering experiments, the Xebec gave rise to the Polacre-Xebec, which replaced the mizzen mast. The mainmast of the new derivative also had a square rig and these new vessels were light and could not carry a heavy load with the shallow draft and low free-board making them unsuitable for open-seas sailing.

6. The Barque

The barque, also referred to as " barc " or " bark ", is a sailing ship first introduced in the 15th century ( 11 ) with 3 or more masts with square sails on all masts, except the aft or mizzen mast. It could carry approximately 500 tons and could hold a crew of 100 people.

Although they are quite similar, the barque should not be confused with the Schooner Bark which is a different vessel.

The Barque ship was commonly used by traders to carry extremely high volumes of cargo from Australia to Europe with cargo mainly consisting of Nitrates and Guano destined for the Western South American coast and they were popular in the period prior to the start of World War II.

7. The Clipper

A clipper was a sailing vessel introduced in the mid-19th century that was mainly used as a merchant ship for transporting goods and it was designed for speed.

Clipper ships ranged in size from a few hundred tons to over 4000 tons ( 12 ) and they all had a narrow build, a protruding stern, 3 to 5 masts for speed, and a square rig.

They were most commonly used by British and American traders to ship goods from China to their countries and they were also used to ferry Gold and Tea back to Great Britain and the Americas.

Famous clipper ships are listed below.

Cisne Branco : This is a steel-hulled built like the original clipper. It is used as a training vessel by the Brazilian navy to this day
Race Horse : This clipper ship set the record of getting from New York to San Francisco in 109 days in 1850 which was a record at that time
Marco Polo : This clipper vessel was the first boat of the time to make around trip between England & Australia in under 6 months in 1852

8. The Windjammer

The Windjammer is a commercial sailing ship built in the 19th century with a capacity between 2,000 to 8,000 tons and the speed ranged from 14 to 21 knots ( 13 ).

It came with three to five square-rigged masts and it had a cost-effective extended hull that allowed for larger storage space.

It was a general-class merchant ship and was mainly used to transport bulky cargo and it ferried lumber, coal, and many other goods from one continent to another before evolving from carrying cargo to carrying passengers on cruises in later generations.

9. The Fluyt

The Fluyt, also known as " fleut " or " fluit " is a sailing ship that originated in the 16th century in the Dutch Republic with a weight between 200 and 300 tons, approximately 80 feet (24 meters) in length, and a crew capacity of 12 - 15 people ( 14 ).

The Fluyt has three squared-rigged masts and was primarily used as a merchant ship to transport cargo.

It was lightly fortified, had a small stern and extended box-style structure, and was crafted using specialized tools to reduce the costs of production and make them affordable to merchants.

10. The Fully-Rigged Ship

A fully rigged ship, also referred to as a "full-rigged ship", is a sailing ship with three or more masts, with all of the masts being square-rigged and the rig, hull, mast, and yards made of iron, wood, or steel.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people and these ships required a larger crew because of their fully rigged construction ( 15 ).

During the 18th century, a full-rigged ship was also referred to as a " frigate " and they were mainly used for patrolling and for attacking.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people ( 16 ).

However, towards the end of the 19th century, these ships were stripped down so they could be handled by a smaller crew which helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

This helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

A fully rigged ship masts from stern to bow consists of: ( 17 )

Mainmast : This is the tallest mast on the ship
Foremast : This is the second tallest mast on the ship
Mizzenmast : This is the third tallest mast on the sailing vessel
Jiggermast : If there is a 4th mast, it will be the jiggermast and will be the smallest mast on the ship

11. The Cutter

The cutter is a smaller sailing ship built in the early 18th century with a single mast rigged fore and aft and it varied in size from 20ft to 34 ft in length on average with a crew capacity of between 21 to 66 people ( 19 ).

A cutter sailing vessel features: ( 18 )

Narrow hull
2 or more headsails
Decked sailcraft
Raking transom
Vertical stem
A gaff-rigged long bowsprit

This sailing ship was used for patrolling territorial waters and other enforcement activities during the 18th century and it was used to ferry soldiers and government officials because it was very fast and could outrun any enemy.

Modern-day cutters have a rugged appearance, are small and aptly fit into their intended purpose – speed and agility and the British Sailing Club still has open-oared cutters in their fleet of sailing ships.

12. The Yawl

A Yawl is a sailing ship that was originally that was originally a dutch ship nicknamed " Dandy " or " Jol " in Dutch built in the 19th century with a speed range from 10-14 knots, an average crew size of 25 people and a ship size ranging from 30ft to 75ft in length with beam sizes ranging from 10ft to 12ft.

They bore two fully-equipped masts and a fore-and-aft sail, a smaller jigger-mast and a mizzen mast that leans towards the rudder post of the ship with the mizzen sail in this case purposely designed to aid in balancing and trimming the ship on rough waters.

One famous yawl sailing ship is the Islander which was a 34ft yawl that Harry Pidgeon sailed around the world on. He was the second person in 1918 to sail around the world at that time.

13. The Brig

The brig is a two-masted sailing ship that was originally built in the 18th century with square rigging on both masts and sometimes had a spanker on the aft mast.

The length of a brig varied from 75ft to 165ft with tonnages up to 480 ith tonnages up to 480 and it needed a crew of 22 people ( 20 ).

The brig was used as a war vessel and a cargo ship for transporting goods and they were later used to ferry large cargo on the open seas since they could easily follow the direction of the prevailing winds.

It came with a berthing deck that had sleeping quarters for cabin crew and marine officials, storage areas, a sail bin, a wood-paneled stove room, guns, and carronades.

They would be brought into the harbor without using tugs and could maneuver well in small areas.

Famous brig ships are listed below.

USS Argus : This was a United States Navy brig that fought in the First Barbary War, taking part in the blockage of Tripoli and the war of 1812
USS Reprisal : This was the first ship of the United States Navy
USS Somers : This was a brig in the United States Navy that became infamous for being the only US Navy ship to undergo a mutiny

14. The Ketch

A ketch is a two-masted sailboat that originated in the 17th century with most ketch ships ranging from 40ft to over 120ft in size and weighing between 100 and 250 tons. A ketch ship needed a smaller crew of only 4 people to operate ( 21 ).

The ketch looked just like the Yawl and as stated had two masts each having a fore-and-aft rig with the difference between the two being that the ketch had a mizzen mast placed on the taller mainmast but at a position in front of the rudder post. The mizzen in this case aided in maneuvering the vessel.

A ketch ship was used for:

Cargo Transportation

15. The Hulk

A hulk is an 18th-century ship that is a derivative of the Carrack with a weight of 400 tons that is afloat but incapable of going to sea. In maritime terms, the name "Hulk" was given to ships that were outdated, stripped down or unprofitable to run.

The bulk of the hulk fleet was comprised of abandoned ships, stripped down and therefore could not continue to ply across the Mediterranean Sea as cargo or transport ships.

They are stationary and kept for their buoyancy and were used as a prison, a place for gambling.

Maritime Museum Of The Atlantic. " Sailing Ship Rigs ".
The New York Times. " America's Cup Held Here Since 1851 ", PDF.
World History Encyclopedia. " Carrack Definition ," Paragraph 3.
Same As Reference 3
Military History. " Carracks, Famous Carracks ," Paragraph 9.
" Aken, tjalken en kraken " by Hans Haalmeijer & Dirk Adrianus Vuik, Page 12.
Google Books Ngram Viewer. " Brigantine ".
Gaspee Info. " Brigentines Described ," Paragraph 3.
Wikipedia. " Barquentine ," Paragraph 1.
" Ship: 5000 Years Of Maritime Adventure " by Brian Lavery, Page 137.
Oxford English Dictionary (Online Edition). " Barque ".
University of Houston. " No. 338 Clipper Ship ". Paragraph 2
Marine Insights. " Windjammer Sailing Ships: From Past to Present ". Paragraph 8
History Today. " Dutch Shipbuilding in the Golden Age ". Volume 34, No. 1
" The Story Of The Sea, Volume 1 " by Arthur Quiller-Couch, Page 20.
Whaling Museum. " Rigs Of Vessel, Ship ," Paragraph 1.
" A Dictionary of Sea Terms " by Anstead, A, Page 96.
Britannia. " Cutter, Sailing Craft ". Paragraph 1.
" The Boats Of Men Of War " by William May & Simon Stephens
Texas Navy Association. " Glossary Of Nautical Terms ". Page 1
National Museum Of American History. " Ship Model, Ketch ". Paragraph 1

The Diary of Samuel Pepys

Daily entries from the 17th century London diary

Encyclopedia
Travel and vehicles

Ketch / catch

Annotations (1)
References (13)

This text was copied from Wikipedia on 4 June 2024 at 5:10AM.

A ketch is a two- masted sailboat whose mainmast is taller than the mizzen mast (or aft-mast), [1] and whose mizzen mast is stepped forward of the rudder post . The mizzen mast stepped forward of the rudder post is what distinguishes the ketch from a yawl , which has its mizzen mast stepped aft of its rudder post. In the 19th and 20th centuries, ketch rigs were often employed on larger yachts and working watercraft, but ketches are also used as smaller working watercraft as short as 15 feet, or as small cruising boats, such as Bill Hanna's Tahiti ketches or L. Francis Herreshoff's Rozinante and H-28.

The name ketch is derived from catch . [2] The ketch's main mast is usually stepped further forward than the position found on a sloop . [3]

The sail plan of a ketch is similar to that of a yawl , on which the mizzen mast is smaller and set further back. There are versions of the ketch rig that only has a mainsail and a mizzen, in which case they are referred to as cat ketch . More commonly ketches have headsails (Jibs). When a ketch is rigged so that it can fly multiple jibs at the same time, the rig is sometimes referred to as a multi-headsail ketch. While sometimes seen in print, it is incorrect to refer to this rig by the modern malaprop of a cutter ketch .

In New England in the 1600s, the ketch was a small coastal working watercraft. In the 1700s, it disappeared from contemporary records, apparently replaced by the schooner . [4] The ketch rig remained popular in America throughout the 19th and early 20th century working watercraft, with well-known examples being the Chesapeake Bay bugeyes, New Haven sharpies, and the Kingston Lobster boats. In Europe, during this same period many of the canoe yawls were technically ketches since their mizzen masts were located forward of the rudder posts. The cat ketch rig experienced a brief period of renewed interest in the 1970s and 1980s as carbon fiber spars made free-standing mast versions of this rig possible for cruising boats under 40 feet.

Staysails can also be hoisted between the top of the mizzen mast and base of the mainmast to help downwind performance. [5]

^ "Definition of KETCH" . merriam-webster.com . Retrieved 17 May 2019 .
^ "the definition of ketch" . dictionary.com . Retrieved 17 May 2019 .
^ Jordan, Richard (13 January 2011). "Sailboat Rig Types: Sloop, Cutter, Ketch, Yawl, Schooner, Cat" . Jordan Yacht Brokerage . Retrieved 17 May 2019 .
^ "Ship Model, Ketch" . National Museum of American History . Retrieved 17 May 2019 .
^ Nicholson, Darrell (5 July 2018). "A One-sided Defense of the Cruising Ketch - Inside Practical Sailor Blog Article" . Practical Sailor . Retrieved 13 June 2019 .

1 Annotation

Second reading, bill on 31 aug 2013 • link.

A KETCH a Vessel having only a Mizen and Main Mast ---An Universal Etymological English Dictionary. N. Bailey, 1731.

If you don't have an account, then register here .

Chart showing the number of references in each month of the diary’s entries.

sailboat with two or more masts